[App_rpt-users] certified-asterisk-1.8.11-c and app_rpt module

Kyle Jones kjonesflorida at yahoo.com
Thu Nov 8 07:06:43 EST 2012


To Whom It May Concern:

I have just installed a fresh CentOS release 5.8 (Final) along with the lasted "certified-asterisk-1.8.11-c" complete with "dahdi-linux-complete-2.5.0+2.5.0" and all of the other required supporting code and asterisk is now up and running along with the Asterisk Digium Configuration Engine via http...... and I am looking to try and find out the latest insights and methods necessary to get the app_rpt module installed and working with this current release of asterisk .... anyone that can help with my project I would appreciate it and ask that you please direct me accordingly.

Also I was trying to login to the http://ohnosec.org/drupal/ and I tried putting my email address that I get the mail list updates from and my password however it wouldn't let me log in for some reason or another.  If you could help resolve that as well this would be much appreciated.

Sincerely,

Kyle Jones






________________________________
 From: "app_rpt-users-request at ohnosec.org" <app_rpt-users-request at ohnosec.org>
To: app_rpt-users at ohnosec.org 
Sent: Wednesday, November 7, 2012 12:00 PM
Subject: App_rpt-users Digest, Vol 45, Issue 7
 
Send App_rpt-users mailing list submissions to
    app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
    app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
    app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Sorta Allstar related (Alan Adamson)
   2. Trying to install from a USB drive (Buddy Brannan)
   3. Re: Trying to install from a USB drive (Buddy Brannan)
   4. Re: Sorta Allstar related (Steve Passmore)
   5. Voicemail on APP_RPT (Ryan Collier)
   6. Re: Sorta Allstar related (Alan Adamson)


----------------------------------------------------------------------

Message: 1
Date: Tue, 6 Nov 2012 13:24:16 -0500
From: Alan Adamson <adamson_alan at hotmail.com>
To: <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Sorta Allstar related
Message-ID: <SNT108-DS529711D455F378ACE2F2FE96B0 at phx.gbl>
Content-Type: text/plain; charset="us-ascii"

I'm using the command in the rpt.conf file to stream audio to an Icecast
server, but I need to somehow lower the level on what it sent to the server.
Would anyone know how to do that. I'm assuming because it's sent through the
console interface that I might be able to string some commands together or
the lame stuff can do it, just looking to lower it by 3 to 6 db if possible.

Thanks,
Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121106/cc1618a4/attachment-0001.html>

------------------------------

Message: 2
Date: Tue, 6 Nov 2012 17:59:20 -0500
From: Buddy Brannan <buddy at brannan.name>
To: app_rpt mailing list <App_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Trying to install from a USB drive
Message-ID: <4748F13A-5557-4409-BDAD-4B2FC23A1050 at brannan.name>
Content-Type: text/plain; charset=us-ascii

Howdy,

I think I must be missing something important.

I need to move my install to a new computer, as the old crappy one it's on now is fix in to crap out. 

The machine that I have kicking around to use doesn't have a CDROM drive, but it will boot off USB. I verified this both by booting from a Chromium USB drive and also a live Archlinux installation. However, burning either Acid or Xipar to a USB drive seems not to work, giving me only a blank screen with a blinking cursor, and no boot prompt or very much else. 

From the Mac terminal, and even from the Linux terminal on the crappy computer,
dd if=acid-somthing-or-other.iso of=/dev/disk1 (for the Mac, or /dev/sda for Linux)

The drive writes, it mounts, it has expected files on it, but it doesn't boot to anything except a blank screen.

Anyone got any ideas?
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: (814) 860-3194 or 888-75-BUDDY





------------------------------

Message: 3
Date: Tue, 6 Nov 2012 18:33:28 -0500
From: Buddy Brannan <buddy at brannan.name>
To: app_rpt mailing list <App_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Trying to install from a USB drive
Message-ID: <69F3E5B9-9D50-44B4-BADE-3BD9C1D9CBFF at brannan.name>
Content-Type: text/plain; charset=us-ascii

Howdy,

Thanks, I'll give that a go. 
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: (814) 860-3194 or 888-75-BUDDY



On Nov 6, 2012, at 5:59 PM, Buddy Brannan <buddy at brannan.name> wrote:

> Howdy,
> 
> I think I must be missing something important.
> 
> I need to move my install to a new computer, as the old crappy one it's on now is fix in to crap out. 
> 
> The machine that I have kicking around to use doesn't have a CDROM drive, but it will boot off USB. I verified this both by booting from a Chromium USB drive and also a live Archlinux installation. However, burning either Acid or Xipar to a USB drive seems not to work, giving me only a blank screen with a blinking cursor, and no boot prompt or very much else. 
> 
> From the Mac terminal, and even from the Linux terminal on the crappy computer,
> dd if=acid-somthing-or-other.iso of=/dev/disk1 (for the Mac, or /dev/sda for Linux)
> 
> The drive writes, it mounts, it has expected files on it, but it doesn't boot to anything except a blank screen.
> 
> Anyone got any ideas?
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: (814) 860-3194 or 888-75-BUDDY
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



------------------------------

Message: 4
Date: Tue, 6 Nov 2012 15:44:40 -0800
From: Steve Passmore <k6kya at hokeynet.net>
To: Alan Adamson <adamson_alan at hotmail.com>
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Sorta Allstar related
Message-ID:
    <CAMkXzgTi-g1zZZgHv-=GLyMPYx7QV-pmb1yoXBUT7WHz56xq=w at mail.gmail.com>
Content-Type: text/plain; charset=windows-1252

I use the following line in rpt.conf for the stream.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --highpass 0.2
-r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

By adding --scale n, where n is a number less than 1 you should be
able to lower the level,  I haven't tried this but it should work.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --scale 0.8
--highpass 0.2 -r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

For reference: http://lame.cvs.sourceforge.net/viewvc/lame/lame/doc/html/switchs.html

Steve

On Tue, Nov 6, 2012 at 10:24 AM, Alan Adamson <adamson_alan at hotmail.com> wrote:
> I'm using the command in the rpt.conf file to stream audio to an Icecast
> server, but I need to somehow lower the level on what it sent to the server?
> Would anyone know how to do that? I'm assuming because it's sent through the
> console interface that I might be able to string some commands together or
> the lame stuff can do it, just looking to lower it by 3 to 6 db if possible.
>
> Thanks,
>
> Alan
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>



-- 
IMPORTANT: This email is intended for the use of the individual
addressee(s) named above and may contain information that is
confidential privileged or unsuitable for overly sensitive persons
with low self-esteem, no sense of humor or irrational religious
beliefs. If you are not the intended recipient, any dissemination,
distribution or copying of this email is not authorized (either
explicitly or implicitly) and constitutes an irritating social
fauxpas. No animals were harmed in the transmission of this email,
although the mutt next door is living on borrowed time, let me tell
you.


------------------------------

Message: 5
Date: Tue, 6 Nov 2012 21:32:41 -0500
From: Ryan Collier <kb8pmy at kb8pmy.net>
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Voicemail on APP_RPT
Message-ID:
    <CAAoTAmmtcYLKhkt08EuJ-wJ4vgHn69psQd63U_j5De0KjQ5NBw at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Greetings,

I have got the voice mail working in the ACID install. But I have one
program with voice mail and someone will be able to answer hopefully.

Actually, this is for all autopatch's. Once I get connected to voice mail,
it will not longer pick up my DTMF's I can star six and star zero
everything. But I can not get send pound to stay in the voice mail. Or even
enter extension dtmf number once in voice mail. I think I made it sound
right. I can add more if needed....


Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121106/f681be0a/attachment-0001.html>

------------------------------

Message: 6
Date: Wed, 7 Nov 2012 09:27:28 -0500
From: Alan Adamson <adamson_alan at hotmail.com>
To: "'Steve Passmore'" <k6kya at hokeynet.net>
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Sorta Allstar related
Message-ID: <SNT108-DS19A425FDBA9C05F13E8B24E96A0 at phx.gbl>
Content-Type: text/plain; charset="us-ascii"

Thanks I'll try that, I had put a --scale in my conf file but it didn't seem
to do anything, I moved it after the --preset as you have it so we'll see if
the --highpass works, then scale should as well, but perhaps it is placement
specific, I'm sure being influenced by the --preset.

Alan

-----Original Message-----
From: Steve Passmore [mailto:k6kya at hokeynet.net] 
Sent: Tuesday, November 06, 2012 6:45 PM
To: Alan Adamson
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Sorta Allstar related

I use the following line in rpt.conf for the stream.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --highpass 0.2
-r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

By adding --scale n, where n is a number less than 1 you should be
able to lower the level,  I haven't tried this but it should work.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --scale 0.8
--highpass 0.2 -r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

For reference:
http://lame.cvs.sourceforge.net/viewvc/lame/lame/doc/html/switchs.html

Steve

On Tue, Nov 6, 2012 at 10:24 AM, Alan Adamson <adamson_alan at hotmail.com>
wrote:
> I'm using the command in the rpt.conf file to stream audio to an Icecast
> server, but I need to somehow lower the level on what it sent to the
server.
> Would anyone know how to do that. I'm assuming because it's sent through
the
> console interface that I might be able to string some commands together or
> the lame stuff can do it, just looking to lower it by 3 to 6 db if
possible.
>
> Thanks,
>
> Alan
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>



-- 
IMPORTANT: This email is intended for the use of the individual
addressee(s) named above and may contain information that is
confidential privileged or unsuitable for overly sensitive persons
with low self-esteem, no sense of humor or irrational religious
beliefs. If you are not the intended recipient, any dissemination,
distribution or copying of this email is not authorized (either
explicitly or implicitly) and constitutes an irritating social
fauxpas. No animals were harmed in the transmission of this email,
although the mutt next door is living on borrowed time, let me tell
you.



------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 45, Issue 7
********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20121108/d4c92180/attachment.html>


More information about the App_rpt-users mailing list