[App_rpt-users] Node Freezing

Steve Schulze n9udo at yellowthunder.org
Fri Nov 16 07:50:35 EST 2012


Yeah, that's what I'm thinking too. Right now doing memory stick swaps 
to see if that's it. On round 2!



Amateur Radio - The Original Social Media

Steve Schulze - Radio Amateur, General Class - N9UDO
Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
Treasurer, Badgerland Amateur Television Society - KB9SFS

http://yellowthunder.org/dstar.html

On 11/15/2012 13:23, Tim Sawyer wrote:
> I'd bet it's your hardware, maybe RAM. It's pretty unlikely Asterisk would totally lock up your machine.
> --
> Tim
> :wq
>
> On Nov 15, 2012, at 5:27 AM, Steve Schulze <n9udo at yellowthunder.org> wrote:
>
>> I had recently moved node 27727 to a new box using the latest full install of ACID.
>>
>> I'm now seeing random freezing of Asterisk, or one of it's components, as the node just stops responding. Sometime the node will run for several hours, longest run was almost 12 hours, I have seen it as short as 1 or 2 hours. When this occurs, I cannot reboot the machine from the prompt. When I attempt, the PC speaker just squeals until I force the power off.
>>
>> Below is a capture of what usually occurs when the node freezes.
>>
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-1321073272'
>>     -- Hungup 'Zap/pseudo-1923931712'
>>     -- Hungup 'Zap/pseudo-471354119'
>>     -- Hungup 'Zap/pseudo-1974549115'
>>     -- Hungup 'Zap/pseudo-938459000'
>>     -- Hungup 'Zap/pseudo-360012123'
>>       [Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>
>> WB9FDZ*CLI>
>>     -- Re-Loading config for repeater 27727
>>
>> WB9FDZ*CLI>
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-1356185696'
>>     -- Hungup 'Zap/pseudo-1200975276'
>>     -- Hungup 'Zap/pseudo-1694965886'
>>     -- Hungup 'Zap/pseudo-1185873296'
>>     -- Hungup 'Zap/pseudo-353324112'
>>     -- Hungup 'Zap/pseudo-956752671'
>>         == Set device 4-1 to usb27727
>> [Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>     -- Re-Loading config for repeater 27727
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>> [Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674 usbradio_read: Possibly stuck USB read channel. [usb27727]
>>   [Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-1234779841'
>>     -- Hungup 'Zap/pseudo-823024661'
>>     -- Hungup 'Zap/pseudo-128844783'
>>     -- Hungup 'Zap/pseudo-1477433026'
>>     -- Hungup 'Zap/pseudo-47743459'
>>   == Set device 4-1 to usb27727
>> [Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>     -- Hungup 'Zap/pseudo-358092408'
>>        [Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>     -- Re-Loading config for repeater 27727
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>   [Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-959192474'
>>     -- Hungup 'Zap/pseudo-119995292'
>>     -- Hungup 'Zap/pseudo-910823610'
>>     -- Hungup 'Zap/pseudo-1271419211'
>>     -- Hungup 'Zap/pseudo-1514445782'
>>     -- Hungup 'Zap/pseudo-1885015791'
>>   == Set device 4-1 to usb27727
>>        [Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>
>> WB9FDZ*CLI>
>>     -- Re-Loading config for repeater 27727
>>
>> WB9FDZ*CLI>
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-123945640'
>>     -- Hungup 'Zap/pseudo-1914243603'
>>     -- Hungup 'Zap/pseudo-1904931772'
>>     -- Hungup 'Zap/pseudo-1252634755'
>>     -- Hungup 'Zap/pseudo-1804246462'
>>     -- Hungup 'Zap/pseudo-569032085'
>>         == Set device 4-1 to usb27727
>> [Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>
>> WB9FDZ*CLI>
>>     -- Re-Loading config for repeater 27727
>>
>> WB9FDZ*CLI>
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-1625376915'
>>     -- Hungup 'Zap/pseudo-1332043632'
>>     -- Hungup 'Zap/pseudo-1082279744'
>>     -- Hungup 'Zap/pseudo-1304564785'
>>     -- Hungup 'Zap/pseudo-976351035'
>>     -- Hungup 'Zap/pseudo-2003986033'
>>         == Set device 4-1 to usb27727
>> [Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>
>> WB9FDZ*CLI>
>>     -- Re-Loading config for repeater 27727
>>
>> WB9FDZ*CLI>
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-562695817'
>>     -- Hungup 'Zap/pseudo-41485895'
>>     -- Hungup 'Zap/pseudo-674125634'
>>     -- Hungup 'Zap/pseudo-1681055800'
>>     -- Hungup 'Zap/pseudo-1172360100'
>>     -- Hungup 'Zap/pseudo-2074122207'
>>         == Set device 4-1 to usb27727
>> [Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master: rpt_thread restarted on node 27727
>>
>> WB9FDZ*CLI>
>>     -- Re-Loading config for repeater 27727
>>
>> WB9FDZ*CLI>
>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>
>> WB9FDZ*CLI>
>> [Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read: HID process has died or something!!
>>
>> WB9FDZ*CLI>
>>     -- Hungup 'Zap/pseudo-81739412'
>>     -- Hungup 'Zap/pseudo-933811143'
>>     -- Hungup 'Zap/pseudo-1900592699'
>>     -- Hungup 'Zap/pseudo-873450041'
>>     -- Hungup 'Zap/pseudo-1455015117'
>>     -- Hungup 'Zap/pseudo-1502090246'
>>         == Set device 4-1 to usb27727
>> [Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread: Loaded parameters from usbradio_tune_usb27727.conf for device usb27727 .
>>
>>
>> The system just keep spewing this string every couple of minutes.
>>
>>
>> Anybody run across this or have any thoughts what might be causing it.
>>
>>
>>
>> Thank you for your time.
>>
>> -- 
>> Amateur Radio - The Original Social Media
>>
>> Steve Schulze - Radio Amateur, General Class - N9UDO
>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>
>> http://yellowthunder.org/dstar.html
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>




More information about the App_rpt-users mailing list