[App_rpt-users] Tone Levels

Buddy Brannan buddy at brannan.name
Fri Nov 16 21:13:30 EST 2012


frequency and infrequency, amplitude and idaplitude. One is used for ID's, and the other for any other morse messages you might want to send. For instance, you might set your ID frequency at a lower pitch and volume (mine is 600 hz and 1024 amplitude), so it doesn't drown out your users, then have other morse sent at, say, 700 hz and a 4096 amplitude, say, to have a morse "K" sent as your courtesy tone. 

You don't have to reboot or to even restart asterisk, not in most cases anyway. I've ound that sometimes changing idrecording required an /etc/init.d/asterisk restart but mostly, not. Instead, try just reloading the repeater configuration, thus:

asterisk -rx "rpt reload"

Or, 
asterisk -r
rpt reload

Vy 73,
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: (814) 860-3194 or 888-75-BUDDY



On Nov 16, 2012, at 9:01 PM, "Jim W7RY" <w7ry at centurytel.net> wrote:

> Also, what is the difference between idfrequency and frequency?  amplitude and idamplitude?
>  
> And when I change these, I have to reboot to get them to take effect. Using rpt reload doesn't seem to make then take effect.
>  
>  
> Thanks!
> 73
>  
> Jim W7RY
>  
>  
>  
>  
> [morse28454]
>  
> speed=20
> frequency=800
> amplitude=4000  ;was 4096
> idfrequency=750
> idamplitude=1024
>  
> From: Jim W7RY
> Sent: Friday, November 16, 2012 5:37 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Tone Levels
>  
> Is there a separate setting for the identifier level?  What command controls it.  Does this level also control the PL transmit level?
>  
> Thanks!
> 73
> Jim W7RY
>  
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list