[App_rpt-users] Node Freezing

Steve Schulze n9udo at yellowthunder.org
Sun Nov 18 08:46:34 EST 2012


It's not the URI. Same issue. Tried different USB ports,same results. 
Sometimes it take only 5 minutes to freeze, sometimes takes 12 hours. 
Strange.....

Might have to send this PC back.


--Steve


On 11/17/2012 13:49, Steve Schulze wrote:
> I ran memtest for a little more than 5 hours, a solid 10 passes and no 
> errors.
>
> I'm now trying a different URI to see if that's the issue.
>
>
> --Steve
>
>
>
>
> On 11/16/2012 12:32, Don Hackler wrote:
>> Download and run memtest86+ from http://www.memtest.org/
>> You can boot it from a floppy or a USB stick.
>>
>> It will help you locate subtle memory problems fairly quickly. I use 
>> it every time I build a machine now.
>>
>> If it runs a few hours without errors, you know your machine is 
>> pretty solid.
>>
>>
>> On Nov 16, 2012, at 4:50 AM, Steve Schulze <n9udo at yellowthunder.org> 
>> wrote:
>>
>>> Yeah, that's what I'm thinking too. Right now doing memory stick 
>>> swaps to see if that's it. On round 2!
>>>
>>>
>>>
>>> Amateur Radio - The Original Social Media
>>>
>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>
>>> http://yellowthunder.org/dstar.html
>>>
>>> On 11/15/2012 13:23, Tim Sawyer wrote:
>>>> I'd bet it's your hardware, maybe RAM. It's pretty unlikely 
>>>> Asterisk would totally lock up your machine.
>>>> -- 
>>>> Tim
>>>> :wq
>>>>
>>>> On Nov 15, 2012, at 5:27 AM, Steve Schulze 
>>>> <n9udo at yellowthunder.org> wrote:
>>>>
>>>>> I had recently moved node 27727 to a new box using the latest full 
>>>>> install of ACID.
>>>>>
>>>>> I'm now seeing random freezing of Asterisk, or one of it's 
>>>>> components, as the node just stops responding. Sometime the node 
>>>>> will run for several hours, longest run was almost 12 hours, I 
>>>>> have seen it as short as 1 or 2 hours. When this occurs, I cannot 
>>>>> reboot the machine from the prompt. When I attempt, the PC speaker 
>>>>> just squeals until I force the power off.
>>>>>
>>>>> Below is a capture of what usually occurs when the node freezes.
>>>>>
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-1321073272'
>>>>>     -- Hungup 'Zap/pseudo-1923931712'
>>>>>     -- Hungup 'Zap/pseudo-471354119'
>>>>>     -- Hungup 'Zap/pseudo-1974549115'
>>>>>     -- Hungup 'Zap/pseudo-938459000'
>>>>>     -- Hungup 'Zap/pseudo-360012123'
>>>>>       [Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Re-Loading config for repeater 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-1356185696'
>>>>>     -- Hungup 'Zap/pseudo-1200975276'
>>>>>     -- Hungup 'Zap/pseudo-1694965886'
>>>>>     -- Hungup 'Zap/pseudo-1185873296'
>>>>>     -- Hungup 'Zap/pseudo-353324112'
>>>>>     -- Hungup 'Zap/pseudo-956752671'
>>>>>         == Set device 4-1 to usb27727
>>>>> [Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>     -- Re-Loading config for repeater 27727
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>> [Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674 
>>>>> usbradio_read: Possibly stuck USB read channel. [usb27727]
>>>>>   [Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599 
>>>>> usbradio_read: HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-1234779841'
>>>>>     -- Hungup 'Zap/pseudo-823024661'
>>>>>     -- Hungup 'Zap/pseudo-128844783'
>>>>>     -- Hungup 'Zap/pseudo-1477433026'
>>>>>     -- Hungup 'Zap/pseudo-47743459'
>>>>>   == Set device 4-1 to usb27727
>>>>> [Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>     -- Hungup 'Zap/pseudo-358092408'
>>>>>        [Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836 
>>>>> rpt_master: rpt_thread restarted on node 27727
>>>>>     -- Re-Loading config for repeater 27727
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>   [Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599 
>>>>> usbradio_read: HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-959192474'
>>>>>     -- Hungup 'Zap/pseudo-119995292'
>>>>>     -- Hungup 'Zap/pseudo-910823610'
>>>>>     -- Hungup 'Zap/pseudo-1271419211'
>>>>>     -- Hungup 'Zap/pseudo-1514445782'
>>>>>     -- Hungup 'Zap/pseudo-1885015791'
>>>>>   == Set device 4-1 to usb27727
>>>>>        [Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700 
>>>>> hidthread: Loaded parameters from usbradio_tune_usb27727.conf for 
>>>>> device usb27727 .
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Re-Loading config for repeater 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-123945640'
>>>>>     -- Hungup 'Zap/pseudo-1914243603'
>>>>>     -- Hungup 'Zap/pseudo-1904931772'
>>>>>     -- Hungup 'Zap/pseudo-1252634755'
>>>>>     -- Hungup 'Zap/pseudo-1804246462'
>>>>>     -- Hungup 'Zap/pseudo-569032085'
>>>>>         == Set device 4-1 to usb27727
>>>>> [Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Re-Loading config for repeater 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-1625376915'
>>>>>     -- Hungup 'Zap/pseudo-1332043632'
>>>>>     -- Hungup 'Zap/pseudo-1082279744'
>>>>>     -- Hungup 'Zap/pseudo-1304564785'
>>>>>     -- Hungup 'Zap/pseudo-976351035'
>>>>>     -- Hungup 'Zap/pseudo-2003986033'
>>>>>         == Set device 4-1 to usb27727
>>>>> [Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Re-Loading config for repeater 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-562695817'
>>>>>     -- Hungup 'Zap/pseudo-41485895'
>>>>>     -- Hungup 'Zap/pseudo-674125634'
>>>>>     -- Hungup 'Zap/pseudo-1681055800'
>>>>>     -- Hungup 'Zap/pseudo-1172360100'
>>>>>     -- Hungup 'Zap/pseudo-2074122207'
>>>>>         == Set device 4-1 to usb27727
>>>>> [Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>> rpt_thread restarted on node 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Re-Loading config for repeater 27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>
>>>>> WB9FDZ*CLI>
>>>>> [Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read: 
>>>>> HID process has died or something!!
>>>>>
>>>>> WB9FDZ*CLI>
>>>>>     -- Hungup 'Zap/pseudo-81739412'
>>>>>     -- Hungup 'Zap/pseudo-933811143'
>>>>>     -- Hungup 'Zap/pseudo-1900592699'
>>>>>     -- Hungup 'Zap/pseudo-873450041'
>>>>>     -- Hungup 'Zap/pseudo-1455015117'
>>>>>     -- Hungup 'Zap/pseudo-1502090246'
>>>>>         == Set device 4-1 to usb27727
>>>>> [Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread: 
>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>> usb27727 .
>>>>>
>>>>>
>>>>> The system just keep spewing this string every couple of minutes.
>>>>>
>>>>>
>>>>> Anybody run across this or have any thoughts what might be causing 
>>>>> it.
>>>>>
>>>>>
>>>>>
>>>>> Thank you for your time.
>>>>>
>>>>> -- 
>>>>> Amateur Radio - The Original Social Media
>>>>>
>>>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>>>
>>>>> http://yellowthunder.org/dstar.html
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>




More information about the App_rpt-users mailing list