[App_rpt-users] Node Freezing

Corey Dean n3fe at repeater.net
Sun Nov 18 10:16:28 EST 2012


This wouldn't happen to be an AMD processor would it?

Corey N3FE
On Nov 18, 2012, at 8:46 AM, "Steve Schulze" <n9udo at yellowthunder.org> wrote:

> It's not the URI. Same issue. Tried different USB ports,same results. 
> Sometimes it take only 5 minutes to freeze, sometimes takes 12 hours. 
> Strange.....
> 
> Might have to send this PC back.
> 
> 
> --Steve
> 
> 
> On 11/17/2012 13:49, Steve Schulze wrote:
>> I ran memtest for a little more than 5 hours, a solid 10 passes and no 
>> errors.
>> 
>> I'm now trying a different URI to see if that's the issue.
>> 
>> 
>> --Steve
>> 
>> 
>> 
>> 
>> On 11/16/2012 12:32, Don Hackler wrote:
>>> Download and run memtest86+ from http://www.memtest.org/
>>> You can boot it from a floppy or a USB stick.
>>> 
>>> It will help you locate subtle memory problems fairly quickly. I use 
>>> it every time I build a machine now.
>>> 
>>> If it runs a few hours without errors, you know your machine is 
>>> pretty solid.
>>> 
>>> 
>>> On Nov 16, 2012, at 4:50 AM, Steve Schulze <n9udo at yellowthunder.org> 
>>> wrote:
>>> 
>>>> Yeah, that's what I'm thinking too. Right now doing memory stick 
>>>> swaps to see if that's it. On round 2!
>>>> 
>>>> 
>>>> 
>>>> Amateur Radio - The Original Social Media
>>>> 
>>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>> 
>>>> http://yellowthunder.org/dstar.html
>>>> 
>>>> On 11/15/2012 13:23, Tim Sawyer wrote:
>>>>> I'd bet it's your hardware, maybe RAM. It's pretty unlikely 
>>>>> Asterisk would totally lock up your machine.
>>>>> -- 
>>>>> Tim
>>>>> :wq
>>>>> 
>>>>> On Nov 15, 2012, at 5:27 AM, Steve Schulze 
>>>>> <n9udo at yellowthunder.org> wrote:
>>>>> 
>>>>>> I had recently moved node 27727 to a new box using the latest full 
>>>>>> install of ACID.
>>>>>> 
>>>>>> I'm now seeing random freezing of Asterisk, or one of it's 
>>>>>> components, as the node just stops responding. Sometime the node 
>>>>>> will run for several hours, longest run was almost 12 hours, I 
>>>>>> have seen it as short as 1 or 2 hours. When this occurs, I cannot 
>>>>>> reboot the machine from the prompt. When I attempt, the PC speaker 
>>>>>> just squeals until I force the power off.
>>>>>> 
>>>>>> Below is a capture of what usually occurs when the node freezes.
>>>>>> 
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-1321073272'
>>>>>>    -- Hungup 'Zap/pseudo-1923931712'
>>>>>>    -- Hungup 'Zap/pseudo-471354119'
>>>>>>    -- Hungup 'Zap/pseudo-1974549115'
>>>>>>    -- Hungup 'Zap/pseudo-938459000'
>>>>>>    -- Hungup 'Zap/pseudo-360012123'
>>>>>>      [Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-1356185696'
>>>>>>    -- Hungup 'Zap/pseudo-1200975276'
>>>>>>    -- Hungup 'Zap/pseudo-1694965886'
>>>>>>    -- Hungup 'Zap/pseudo-1185873296'
>>>>>>    -- Hungup 'Zap/pseudo-353324112'
>>>>>>    -- Hungup 'Zap/pseudo-956752671'
>>>>>>        == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> [Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674 
>>>>>> usbradio_read: Possibly stuck USB read channel. [usb27727]
>>>>>>  [Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599 
>>>>>> usbradio_read: HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-1234779841'
>>>>>>    -- Hungup 'Zap/pseudo-823024661'
>>>>>>    -- Hungup 'Zap/pseudo-128844783'
>>>>>>    -- Hungup 'Zap/pseudo-1477433026'
>>>>>>    -- Hungup 'Zap/pseudo-47743459'
>>>>>>  == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>>    -- Hungup 'Zap/pseudo-358092408'
>>>>>>       [Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836 
>>>>>> rpt_master: rpt_thread restarted on node 27727
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>  [Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599 
>>>>>> usbradio_read: HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-959192474'
>>>>>>    -- Hungup 'Zap/pseudo-119995292'
>>>>>>    -- Hungup 'Zap/pseudo-910823610'
>>>>>>    -- Hungup 'Zap/pseudo-1271419211'
>>>>>>    -- Hungup 'Zap/pseudo-1514445782'
>>>>>>    -- Hungup 'Zap/pseudo-1885015791'
>>>>>>  == Set device 4-1 to usb27727
>>>>>>       [Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700 
>>>>>> hidthread: Loaded parameters from usbradio_tune_usb27727.conf for 
>>>>>> device usb27727 .
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-123945640'
>>>>>>    -- Hungup 'Zap/pseudo-1914243603'
>>>>>>    -- Hungup 'Zap/pseudo-1904931772'
>>>>>>    -- Hungup 'Zap/pseudo-1252634755'
>>>>>>    -- Hungup 'Zap/pseudo-1804246462'
>>>>>>    -- Hungup 'Zap/pseudo-569032085'
>>>>>>        == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-1625376915'
>>>>>>    -- Hungup 'Zap/pseudo-1332043632'
>>>>>>    -- Hungup 'Zap/pseudo-1082279744'
>>>>>>    -- Hungup 'Zap/pseudo-1304564785'
>>>>>>    -- Hungup 'Zap/pseudo-976351035'
>>>>>>    -- Hungup 'Zap/pseudo-2003986033'
>>>>>>        == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-562695817'
>>>>>>    -- Hungup 'Zap/pseudo-41485895'
>>>>>>    -- Hungup 'Zap/pseudo-674125634'
>>>>>>    -- Hungup 'Zap/pseudo-1681055800'
>>>>>>    -- Hungup 'Zap/pseudo-1172360100'
>>>>>>    -- Hungup 'Zap/pseudo-2074122207'
>>>>>>        == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master: 
>>>>>> rpt_thread restarted on node 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Re-Loading config for repeater 27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>> [Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read: 
>>>>>> HID process has died or something!!
>>>>>> 
>>>>>> WB9FDZ*CLI>
>>>>>>    -- Hungup 'Zap/pseudo-81739412'
>>>>>>    -- Hungup 'Zap/pseudo-933811143'
>>>>>>    -- Hungup 'Zap/pseudo-1900592699'
>>>>>>    -- Hungup 'Zap/pseudo-873450041'
>>>>>>    -- Hungup 'Zap/pseudo-1455015117'
>>>>>>    -- Hungup 'Zap/pseudo-1502090246'
>>>>>>        == Set device 4-1 to usb27727
>>>>>> [Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread: 
>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device 
>>>>>> usb27727 .
>>>>>> 
>>>>>> 
>>>>>> The system just keep spewing this string every couple of minutes.
>>>>>> 
>>>>>> 
>>>>>> Anybody run across this or have any thoughts what might be causing 
>>>>>> it.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Thank you for your time.
>>>>>> 
>>>>>> -- 
>>>>>> Amateur Radio - The Original Social Media
>>>>>> 
>>>>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>>>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>>>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>>>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>>>> 
>>>>>> http://yellowthunder.org/dstar.html
>>>>>> 
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> --
> This message was scanned and is believed to be clean.
> Click here to report this message as spam. 
> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1CD81221F.A993F
> 
> 



More information about the App_rpt-users mailing list