[App_rpt-users] Node Freezing

Steve Schulze n9udo at yellowthunder.org
Sun Nov 18 16:21:30 EST 2012


No it's a P4 3.0g with 1G ram.

One of those IBM TigerDirect refurbs for 99 bucks!

I have had great luck with these in the past, but maybe this one is FUBAR.



--Steve





  On 11/18/2012 09:16, Corey Dean wrote:
> This wouldn't happen to be an AMD processor would it?
>
> Corey N3FE
> On Nov 18, 2012, at 8:46 AM, "Steve Schulze" <n9udo at yellowthunder.org> wrote:
>
>> It's not the URI. Same issue. Tried different USB ports,same results.
>> Sometimes it take only 5 minutes to freeze, sometimes takes 12 hours.
>> Strange.....
>>
>> Might have to send this PC back.
>>
>>
>> --Steve
>>
>>
>> On 11/17/2012 13:49, Steve Schulze wrote:
>>> I ran memtest for a little more than 5 hours, a solid 10 passes and no
>>> errors.
>>>
>>> I'm now trying a different URI to see if that's the issue.
>>>
>>>
>>> --Steve
>>>
>>>
>>>
>>>
>>> On 11/16/2012 12:32, Don Hackler wrote:
>>>> Download and run memtest86+ from http://www.memtest.org/
>>>> You can boot it from a floppy or a USB stick.
>>>>
>>>> It will help you locate subtle memory problems fairly quickly. I use
>>>> it every time I build a machine now.
>>>>
>>>> If it runs a few hours without errors, you know your machine is
>>>> pretty solid.
>>>>
>>>>
>>>> On Nov 16, 2012, at 4:50 AM, Steve Schulze <n9udo at yellowthunder.org>
>>>> wrote:
>>>>
>>>>> Yeah, that's what I'm thinking too. Right now doing memory stick
>>>>> swaps to see if that's it. On round 2!
>>>>>
>>>>>
>>>>>
>>>>> Amateur Radio - The Original Social Media
>>>>>
>>>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>>>
>>>>> http://yellowthunder.org/dstar.html
>>>>>
>>>>> On 11/15/2012 13:23, Tim Sawyer wrote:
>>>>>> I'd bet it's your hardware, maybe RAM. It's pretty unlikely
>>>>>> Asterisk would totally lock up your machine.
>>>>>> -- 
>>>>>> Tim
>>>>>> :wq
>>>>>>
>>>>>> On Nov 15, 2012, at 5:27 AM, Steve Schulze
>>>>>> <n9udo at yellowthunder.org> wrote:
>>>>>>
>>>>>>> I had recently moved node 27727 to a new box using the latest full
>>>>>>> install of ACID.
>>>>>>>
>>>>>>> I'm now seeing random freezing of Asterisk, or one of it's
>>>>>>> components, as the node just stops responding. Sometime the node
>>>>>>> will run for several hours, longest run was almost 12 hours, I
>>>>>>> have seen it as short as 1 or 2 hours. When this occurs, I cannot
>>>>>>> reboot the machine from the prompt. When I attempt, the PC speaker
>>>>>>> just squeals until I force the power off.
>>>>>>>
>>>>>>> Below is a capture of what usually occurs when the node freezes.
>>>>>>>
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-1321073272'
>>>>>>>     -- Hungup 'Zap/pseudo-1923931712'
>>>>>>>     -- Hungup 'Zap/pseudo-471354119'
>>>>>>>     -- Hungup 'Zap/pseudo-1974549115'
>>>>>>>     -- Hungup 'Zap/pseudo-938459000'
>>>>>>>     -- Hungup 'Zap/pseudo-360012123'
>>>>>>>       [Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-1356185696'
>>>>>>>     -- Hungup 'Zap/pseudo-1200975276'
>>>>>>>     -- Hungup 'Zap/pseudo-1694965886'
>>>>>>>     -- Hungup 'Zap/pseudo-1185873296'
>>>>>>>     -- Hungup 'Zap/pseudo-353324112'
>>>>>>>     -- Hungup 'Zap/pseudo-956752671'
>>>>>>>         == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>> [Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674
>>>>>>> usbradio_read: Possibly stuck USB read channel. [usb27727]
>>>>>>>   [Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599
>>>>>>> usbradio_read: HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-1234779841'
>>>>>>>     -- Hungup 'Zap/pseudo-823024661'
>>>>>>>     -- Hungup 'Zap/pseudo-128844783'
>>>>>>>     -- Hungup 'Zap/pseudo-1477433026'
>>>>>>>     -- Hungup 'Zap/pseudo-47743459'
>>>>>>>   == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>     -- Hungup 'Zap/pseudo-358092408'
>>>>>>>        [Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836
>>>>>>> rpt_master: rpt_thread restarted on node 27727
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>   [Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599
>>>>>>> usbradio_read: HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-959192474'
>>>>>>>     -- Hungup 'Zap/pseudo-119995292'
>>>>>>>     -- Hungup 'Zap/pseudo-910823610'
>>>>>>>     -- Hungup 'Zap/pseudo-1271419211'
>>>>>>>     -- Hungup 'Zap/pseudo-1514445782'
>>>>>>>     -- Hungup 'Zap/pseudo-1885015791'
>>>>>>>   == Set device 4-1 to usb27727
>>>>>>>        [Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700
>>>>>>> hidthread: Loaded parameters from usbradio_tune_usb27727.conf for
>>>>>>> device usb27727 .
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-123945640'
>>>>>>>     -- Hungup 'Zap/pseudo-1914243603'
>>>>>>>     -- Hungup 'Zap/pseudo-1904931772'
>>>>>>>     -- Hungup 'Zap/pseudo-1252634755'
>>>>>>>     -- Hungup 'Zap/pseudo-1804246462'
>>>>>>>     -- Hungup 'Zap/pseudo-569032085'
>>>>>>>         == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-1625376915'
>>>>>>>     -- Hungup 'Zap/pseudo-1332043632'
>>>>>>>     -- Hungup 'Zap/pseudo-1082279744'
>>>>>>>     -- Hungup 'Zap/pseudo-1304564785'
>>>>>>>     -- Hungup 'Zap/pseudo-976351035'
>>>>>>>     -- Hungup 'Zap/pseudo-2003986033'
>>>>>>>         == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-562695817'
>>>>>>>     -- Hungup 'Zap/pseudo-41485895'
>>>>>>>     -- Hungup 'Zap/pseudo-674125634'
>>>>>>>     -- Hungup 'Zap/pseudo-1681055800'
>>>>>>>     -- Hungup 'Zap/pseudo-1172360100'
>>>>>>>     -- Hungup 'Zap/pseudo-2074122207'
>>>>>>>         == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master:
>>>>>>> rpt_thread restarted on node 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Re-Loading config for repeater 27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>> [Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read:
>>>>>>> HID process has died or something!!
>>>>>>>
>>>>>>> WB9FDZ*CLI>
>>>>>>>     -- Hungup 'Zap/pseudo-81739412'
>>>>>>>     -- Hungup 'Zap/pseudo-933811143'
>>>>>>>     -- Hungup 'Zap/pseudo-1900592699'
>>>>>>>     -- Hungup 'Zap/pseudo-873450041'
>>>>>>>     -- Hungup 'Zap/pseudo-1455015117'
>>>>>>>     -- Hungup 'Zap/pseudo-1502090246'
>>>>>>>         == Set device 4-1 to usb27727
>>>>>>> [Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread:
>>>>>>> Loaded parameters from usbradio_tune_usb27727.conf for device
>>>>>>> usb27727 .
>>>>>>>
>>>>>>>
>>>>>>> The system just keep spewing this string every couple of minutes.
>>>>>>>
>>>>>>>
>>>>>>> Anybody run across this or have any thoughts what might be causing
>>>>>>> it.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thank you for your time.
>>>>>>>
>>>>>>> -- 
>>>>>>> Amateur Radio - The Original Social Media
>>>>>>>
>>>>>>> Steve Schulze - Radio Amateur, General Class - N9UDO
>>>>>>> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
>>>>>>> Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
>>>>>>> Treasurer, Badgerland Amateur Television Society - KB9SFS
>>>>>>>
>>>>>>> http://yellowthunder.org/dstar.html
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> --
>> This message was scanned and is believed to be clean.
>> Click here to report this message as spam.
>> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1CD81221F.A993F
>>
>>
>




More information about the App_rpt-users mailing list