[App_rpt-users] ID Interval on Asterisk

Keith Goobie keith at goobie.org
Fri Nov 23 22:13:15 EST 2012

Hi Ramesh and Buddy

I set the duplex=0 in the rpt.conf and usbradio.conf files and it is looking
very good.  It was based on reports I am getting still doing the CW id.  I
have commented out the line and we are now operational.  All bugs have been

Take your time on the files.  We are now working.  It has been tested and
the audio reports we are getting is quite good.


On 11/23/12 10:08 PM, "Ramesh Dhami, VA3UV/M" <ramesh at va3uv.com> wrote:

> Hi Keith:
> In the rpt.conf file set duplex=0
> That will disable the ID, hang time, etc.
> Still have not had cycles to review your cfg files in detail - work stuff had
> me tied up for a couple of days.
> R.
> Sent on the TELUS Mobility network with BlackBerry
> -----Original Message-----
> From: Keith Goobie <keith at goobie.org>
> Sender: app_rpt-users-bounces at ohnosec.org
> Date: Fri, 23 Nov 2012 21:02:03
> To: app_rpt-users at ohnosec.org list<App_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] ID Interval on Asterisk
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA

More information about the App_rpt-users mailing list