[App_rpt-users] Help Motorola GM300 and app_rpt
fvillarroel at yahoo.com
Fri Nov 30 13:20:23 EST 2012
Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.
Thank you for you help.
Enviado desde mi iPhone
El 30-11-2012, a las 13:58, Keith Goobie <keith at goobie.org> escribió:
> Simplex is not a cable design issue. It is controlled from rpt.conf and usbradio.conf
> Sent from my iPhone
> On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw at ke6upi.com> wrote:
>> Are you using one radio in simplex mode? If so you need a simplex cable. http://www.uricables.com/motorola.html
>> On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <fvillarroel at yahoo.com> wrote:
>>> Dear All.
>>> I have installed ACID succesfully
>>> I have the follows devices connected:
>>> Motorola GM300 conected to my Asterisk (Centos)
>>> http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable)
>>> I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.
>>> When i try to do *98 i have not audio in radio base and mobiles radios (handy).
>>> Does anyone tell me what is the best config for usbradio.conf and rpt.conf?
>>> I hope anyone could help me or how i can do.
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users