[App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1

Jim Duuuude telesistant at hotmail.com
Sat Oct 6 15:06:21 EDT 2012


yes, perhaps that would be a good idea :-)

Jim

From: n5zua at earthlink.net
To: app_rpt-users at ohnosec.org
Date: Sat, 6 Oct 2012 12:36:20 -0500
Subject: [App_rpt-users] mpg123: no process killed - Asterisk endedwith	exit	status 1








Same here. Mabye time to ask Dude to take a look at 
it. Zaptel seems to not be happy.
 
N5ZUA

  ----- Original Message ----- 
  From: 
  Lu Vencl 
  To: Don Hackler 
  Cc: <app_rpt-users at ohnosec.org> 
  ; Scott Weis ; 
  Steve Agee 
  
  Sent: Saturday, October 06, 2012 12:32 
  PM
  Subject: Re: [App_rpt-users] mpg123: no 
  process killed - Asterisk endedwith exit status 1
  

  Did the new install again with a new cd I burned and still have the same 
  issue. 
  

  

  Sent from my iPhone, Lu Vencl
  
On Oct 6, 2012, at 12:52 PM, Don Hackler <donh at sigma.net> wrote:


  
    I had the same thing… about 5 minutes later 
    asterisk would finally stay up, but there would be other problems when I 
    would try to 
    make connections to radios work.  One way audio, among other 
    things.  I spent a few days trying to troubleshoot it.
    When I finally did a fresh download and re-installed from scratch, 
    everything just came up and worked as expected.
    

    The other problem I had with that bad disk was the dictionary package 
    was missing, so when you tried to set the
    password during the install, the root password wasn't getting set, so I 
    would have to boot it in single user mode and force a password into 
    it. 
    

    
    On Oct 6, 2012, at 4:41 AM, "Lu Vencl" <vencl at att.net> wrote:
    
      
      
      Very interesting.. I will try that and 
      report back..
      The odd thing is that Asterisk will 
      eventually start, but it takes about 5 minutes or so to settle 
      down.
      KA4EPS
       
       
      
      
      From: Don Hackler [mailto:donh at sigma.net] 
Sent: Saturday, October 06, 2012 3:00 
      AM
To: app_rpt-users at ohnosec.org
Cc: Lu Vencl; Scott Weis; Steve 
      Agee
Subject: Re: 
      [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 
      1
      
      
      When 
      I had this problem, I tried to install a few times and kept coming up with 
      this error.  I had to download a fresh copy of the install CD 
      to
      
      correct 
      the problem.  There was a subtle problem in the downloaded bits on 
      the first CD.
      
      
      
      
      
      On 
      Oct 5, 2012, at 10:44 PM, Steve Agee <n5zua at earthlink.net> 
      wrote:
      


      
      
      I'm having this 
      issue as well on a fresh install. The machine is 64 bit:
      
      
      
      [Oct  5 
      22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem with 
      your Zaptel configuration and will shutdown for your protection.  You 
      have options:
        1. You only 
      have to compile Zaptel support into Asterisk if you need it.  One 
      option is to recompile without Zaptel 
      support.
        2. You only have to 
      load Zaptel drivers if you want to take advantage of Zaptel 
      services.  One option is to unload zaptel modules if you don't need 
      them.
        3. If you need Zaptel 
      services, you must correctly configure Zaptel.
mpg123: no process 
      killed
Asterisk ended with exit status 1
Asterisk died with code 
      1.
Automatically restarting Asterisk.
      
      
      
      N5ZUA
      
       
      
        
        ----- Original 
        Message -----
        
        From: Scott 
        Weis
        
        To: 'Lu Vencl' ; app_rpt-users at ohnosec.org
        
        Sent: Friday, October 05, 2012 9:23 
        PM
        
        Subject: Re: [App_rpt-users] mpg123: no 
        process killed - Asterisk endedwith exit status 
        1
        
         
        Your system most likely updated it’s 
        kernel.. So you need to rebuild/install zaptel.
        
        
        
        From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu 
        Vencl
Sent: Friday, October 05, 2012 9:42 
        PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] mpg123: no 
        process killed - Asterisk ended with exit status 
        1
        
        Anyone 
        know why a new node I just built goes through several of these before 
        settling down after a reboot?
        I 
        have hear this complaint from someone else before, but he can’t remember 
        what he did to fix his node.
        Thanks
        Lu
        KA4EPS
        
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        mpg123: 
        no process killed
        Asterisk 
        ended with exit status 1
        Asterisk 
        died with code 1.
        Automatically 
        restarting Asterisk.
        
         
        
        
        
        
         
        _______________________________________________
App_rpt-users 
        mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
      _______________________________________________
App_rpt-users 
      mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
       


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20121006/555458c0/attachment.html>


More information about the App_rpt-users mailing list