[App_rpt-users] Alternate IAX port >> Registered ok but not listed?

Kevin Oleniczak kevinoleniczak at gmail.com
Tue Oct 9 20:29:36 EDT 2012


I had already done that in the portal but it still wasn't working. As an
experiment, i changed everything back to the original 4569 port and
forwarded that on my router. I could then connect with the webtransceiver.
However i can't leave it there and need to get it to work on an alternate
port. It seems from my testing that something is hard set to port 4569 on
the allstar end of things?

ideas?

thank you

On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n at cs.com> wrote:

> Yes – you need to log onto the portal and get to the server configuration
> tab – there is a place there to change to port number that the registration
> server is talking to.****
>
> ** **
>
> ** **
>
> Ken****
>
> ** **
>
> ** **
>
> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Kevin Oleniczak
> *Sent:* Tuesday, October 09, 2012 12:09 AM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not
> listed?****
>
> ** **
>
> I am unable to connect to my node from the webtransceiver and don't see it
> listed on the active nodes page. I use an alternate iax port because i have
> to. ****
>
> From reading other posts… it seems I may need an admin to change my iax
> port from 4569 to what I now want to use which is 4570? thoughts?****
>
>  ****
>
> My registration is still showing 4569 and am forwarding 4570 on my router
> to my ACID box.****
>
>  ****
>
> cruiser*CLI> iax2 show registry****
>
> Host                  dnsmgr  Username    Perceived             Refresh
> State****
>
> <myip>:4569   N       28970       <myip>:4569          60  Registered****
>
>  ****
>
> I’m not seeing my node show up and believe this is the cause. In my
> iax.conf I have bindport set 4570 and also in server config under network I
> set port 4570 on the portal.****
>
>  ****
>
> looking at rpt_extnodes i see my node listed with the correct port...****
>
> ** **
>
> 28970=radio@<myip>:4570/28970,<myip>****
>
> ** **
>
> ** **
>
> [general]****
>
> bindaddr=0.0.0.0****
>
> bindport=4570****
>
> ....****
>
>  ****
>
> register=28970:<mypasswd>@register.allstarlink.org****
>
>  ****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20121009/9f830df2/attachment.html>


More information about the App_rpt-users mailing list