[App_rpt-users] Node behind a NAT router

Jeffrey S. Carrier jeff.carrier at rmsmsecurity.com
Mon Oct 22 11:00:40 EDT 2012

Does the RTCM work with XIPAR?  If it does I haven't figured it out yet
(which isn't saying much). 





From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Duuuude
Sent: Sunday, October 21, 2012 7:18 PM
To: Ramesh Dhami; app_rpt mailing list
Subject: Re: [App_rpt-users] Node behind a NAT router


Gosh.. just buy an RTCM, and you wont have problems like that ;-)...

[Eventually Ya'all will realize that I'm going to sarcastically suggest
fixing just about EVERYTHING
and ANYTHING with an RTCM]....


> Date: Sun, 21 Oct 2012 21:06:59 -0400
> From: Ramesh at va3uv.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Node behind a NAT router
> Hi Guys;
> I have a node behind a NAT router, which is also masquerading the 
> incoming IP.
> So any attempt to connect to it fails since the reported IP (i.e., the

> masqueraded IP) does not match the real IP (in the rpt_extnodes file).
> I do not have access to the router at the site, so anything I can do
> the node to make this work?
> TIA!
> Ramesh.
> www.freestar.us
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20121022/0220a64d/attachment.html>

More information about the App_rpt-users mailing list