[App_rpt-users] Using SVN copy of Asterisk on RaspberryPi (and "usb.h")

Shane Morris edgecomberts at gmail.com
Sat Oct 27 10:34:44 EDT 2012


I like that quote: "not recommended for beginners" ^.~

On Sun, Oct 28, 2012 at 1:31 AM, Ramesh Dhami, VA3UV/M <ramesh at va3uv.com> wrote:
> Google "Raspberry Pi Downloads"
>
> I think it is at the bottom of the list of downloads "not recommended for beginners"
>
> R.
>
> Sent on the TELUS Mobility network with BlackBerry
>
> -----Original Message-----
> From: Shane Morris <edgecomberts at gmail.com>
> Date: Sun, 28 Oct 2012 01:24:58
> To: <ramesh at va3uv.com>
> Cc: app_rpt-users<app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Using SVN copy of Asterisk on RaspberryPi (and "usb.h")
>
> Ah, yup. As long as it has some kind of standard kernel that you can
> get the source to, I think we'll be out of trouble. If you're able to
> at some point (perhaps when not mobile) could you give me a link to
> the distros webpage, so I can take a look?
>
> Many thanks!
>
> Shane.
>
> On Sun, Oct 28, 2012 at 1:22 AM, Ramesh Dhami, VA3UV/M <ramesh at va3uv.com> wrote:
>> Hi Shane:
>>
>> I am mobile atm.
>>
>> I was going to try the ARM distro - that may offer some advantages over the Raspbian distro.
>>
>> R.
>>
>> Sent on the TELUS Mobility network with BlackBerry
>>
>> -----Original Message-----
>> From: Shane Morris <edgecomberts at gmail.com>
>> Sender: app_rpt-users-bounces at ohnosec.org
>> Date: Sun, 28 Oct 2012 01:03:11
>> To: app_rpt mailing list<app_rpt-users at ohnosec.org>
>> Subject: Re: [App_rpt-users] Using SVN copy of Asterisk on RaspberryPi (and
>>         "usb.h")
>>
>> Ok, Ramesh, and list, an update:
>>
>> This makes sense. I expect this to change in the not too distant
>> future, but for now, we hold on tight.
>>
>> The fact those video drivers were made open source is actually *very*
>> important. Since RPi doesn't use a standard way of booting (read:
>> GRUB) due to the peculiarities of the way the system boots, related to
>> the GPU, the actual kernel cannot be built in a "standard" way, ie,
>> Debian process. So anything you read on the net, regards building a
>> kernel may or may not work, YMMV, but I'm willing to bet a nickel to a
>> million it won't work.
>>
>> This is very similar to the PS2 Linux I used to use, and I'm not sure
>> why I haven't seen it before now. But, hindsight is a wonderful thing,
>> right? =P
>>
>> So, the shakedown from this is that, potentially, there will be a
>> release of a "standard" bootloader, and a "standard" kernel. Which
>> means the custom kernel (3.2.27+) which sure as heck don't have a
>> aptitude package, and probably never will, doesn't have to be used any
>> more, and a standard kernel might be able to be used in its place. The
>> flow on effect? We can now download the kernel sources, via a command
>> like "sudo apt-get install linux-sources-3.2" for example.
>>
>> A timeframe for this "standard" Raspbian release is unknown at this
>> stage, the GPU/ bootloader source was only released four days ago...!
>> But Ramesh, even though you and I may have to download a new version
>> of Raspbian, and then the SVN of Allstar, and all the aptitude
>> packages *again*, there may be a light at the end of the tunnel...
>>
>> On Sun, Oct 28, 2012 at 12:01 AM, Shane Morris <edgecomberts at gmail.com> wrote:
>>> Sorry all, didn't click "Reply to all" - oops!
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Shane Morris <edgecomberts at gmail.com>
>>> Date: Sat, Oct 27, 2012 at 11:59 PM
>>> Subject: Re: [App_rpt-users] Using SVN copy of Asterisk on RaspberryPi
>>> (and "usb.h")
>>> To: "Ramesh Dhami (VA3UV)" <Ramesh at va3uv.com>
>>>
>>>
>>> Hey Ramesh,
>>>
>>> I agree, no one seems to really care about the RPi at the moment -
>>> theres glory in open sourcing those video drivers I alluded to before,
>>> and getting Plan9 to work on it, and believe you me, I'd love to see
>>> that, but the thing is, right now, the blokes on the ground who don't
>>> have the software to do what they need are suffering.
>>>
>>> The other thing is, RPi forums are not coming to the party. Unsure as
>>> to why. I have noted that I'm using an older version of Asterisk and
>>> thats a deliberate thing - newer versions of Asterisk don't have
>>> support for app_rpt, as far as I'm aware. Possibly they see we're
>>> using such an old version, and wash their hands of us straight away
>>> due to compatibility issues...?
>>>
>>> I had a similar situation with FreeSWiTCH once, downloaded the trunk
>>> the night before they did a big update from 0.4 to 0.5 and of course,
>>> they'd changed the way the config files worked, totally. Went onto IRC
>>> to talk about it, they were really good about it, but they kind of
>>> said, "Gee, you must have downloaded the trunk at the wrong time..."
>>>
>>> Of course, I refuse to let my URI become an AU$180 paperweight.
>>>
>>> Practicality: there is no aptitude package for the kernel source. Its
>>> as simple as that. From 3.1.9 to 3.2.27+, not a cracker. They cite
>>> this is a fast moving target, and while I sympathise with them, this
>>> thing *is* moving, it leaves poor blokes like you and I out in the
>>> cold. And I bet we're not the only ones asking about the kernel
>>> source...! I've tried using "apt-cache search kernel-devel" and
>>> nothing. I'm considering adding mainline Debian repos to aptitude, and
>>> downloading the kernel source for Wheezy from there. I may have to
>>> then disable the mainline repos, I'd actually run into issues with the
>>> compilation of Asterisk (before realising app_rpt wasn't able to be
>>> selected) and the particular architecture - GSM codec won't compile
>>> for an ARMv6 target, must be generic ARM.
>>>
>>> That should, in theory, work. Since the package is source, and not a
>>> platform specific application, theres no case of it downloading an x86
>>> package, say, and trying to execute it. As for the hooks? Unsure,
>>> there would be a particular directory structure that it would create.
>>> But then theres a proviso: since its a "canned" package, will it
>>> actually work?
>>>
>>> I've actually installed tonezone2-dev from aptitude, and then was
>>> told, don't, it won't work. I must install the source version of
>>> tonezone included with Zaptel included with the SVN version of
>>> Allstar. I don't doubt why. They built it. Plus is the tonezone2 too
>>> new? Etc etc. I didn't really ask why, I think understand enough.To
>>> get myself into trouble, evidently.
>>>
>>> I cant sleep at the moment, and I'm not tired. Might grab a coffee,
>>> drag out the Macbook out to the dining room where my DJ rack with the
>>> equipment in it sits in the corner, and try this adding repo thing. I
>>> encourage you to try the same - if only so we can compare notes. I
>>> take it you're in Canada with a "VA" callsign? I was VK2FPGA before I
>>> let it lapse due to personal issues. I'm doing this for a community
>>> group at the moment who, at a particular part of the year, get a two
>>> week temporary licence, and use Simoco SRM9000s on UHF. If I can get
>>> this working, I might be able to give my mate this as part of his
>>> wedding present, although I'm sure his bride will question the
>>> applicability to her ^.^ Don't worry, they're getting a lovely photo
>>> frame that I'm going to encourage them to put a photo of their special
>>> day into.
>>>
>>> In any case, Ramesh, I hope this is a little food for thought for ya,
>>> I'm trying to think about ways around the problem. I mean, there has
>>> to be some way around it, its Linux for crying out loud! It *is* the
>>> hackers OS, after all...
>>>
>>> Hope this helps...!
>>>
>>> Shane.
>>>
>>> On Sat, Oct 27, 2012 at 11:27 PM, Ramesh Dhami (VA3UV) <Ramesh at va3uv.com> wrote:
>>>> Hi Shane;
>>>>
>>>> Seems like there is little interest in the PI at the moment!
>>>>
>>>> Here are the notes that Jim gave me to install Asterisk / app_rpt on my ALIX
>>>> board, running Centos.... of course the commands and packages will need to
>>>> be adjusted - but, may be this will help you:
>>>>
>>>>
>>>>
>>>> # bear in mind, this applies to *this particular installation*... some
>>>> needed stuff
>>>> # was already installed.. if you want a completely inclusive list of all the
>>>> stuff done
>>>> # on a completely bear Centos install, look at the phase1.sh script in the
>>>> acid trunk SVN directory
>>>>
>>>> # update to latest kernel (since the 'kenrnel-devel' package will have to
>>>> match this version
>>>> yum -y update kernel
>>>>
>>>> # install all packages needed to support Zaptel/Asterisk
>>>> yum -y install zlib-devel kernel-devel alsa-lib-devel ncurses-devel
>>>> libusb-devel newt-devel openssl-devel curl-devel
>>>>
>>>> # install from SVN (per Allstarlink site)
>>>> cd /usr/src
>>>> rm -rf astsrc
>>>>
>>>>
>>>> mv trunk astsrc
>>>> cd astsrc
>>>> make upgrade-acid
>>>>
>>>> # install the initial default config files to make a SimpleUSB node
>>>> cd /usr/src/astsrc/configs
>>>> cp *.conf /etc/asterisk
>>>> cd simpleusb
>>>> cp *.conf /etc/asterisk
>>>>
>>>> # move the 'zaptel.conf' file to the right place
>>>> cd /etc/asterisk
>>>> mv zaptel.conf /etc
>>>>
>>>> # install the system (boot) startup files for Zaptel
>>>> cd /usr/src/astsrc/zaptel
>>>> make config
>>>>
>>>> # install the system (boot) startup files for Asterisk
>>>> cd /usr/src/astsrc/asterisk
>>>> make config
>>>>
>>>> # Start Zaptel manually this time
>>>> service zaptel start
>>>>
>>>> # Start Asterisk manually this time
>>>> service asterisk start
>>>>
>>>>
>>>> # now you have a running Asterisk/app_rpt system
>>>> # with a "default" SimpleUSB configuration
>>>> # this does *not*, however, install the Allstar Support
>>>> # scripts, like updatenodelist
>>>>
>>>>
>>>> =================================
>>>>
>>>> So far, I have installed:
>>>>
>>>> zlib1g-dev
>>>> alsa-utils
>>>> libncurses5-dev
>>>> libusb-dev
>>>> libnewt-dev
>>>>
>>>>
>>>> Jim's instructions say to install "kernel-devel" - we need to solve this
>>>> mystery.
>>>>
>>>>
>>>> How are you compiling the zaptel stuff?
>>>>
>>>>
>>>> Have you done a 'make upgrade-acid' in the /usr/src/astsrc folder? - were
>>>> you able to get that to work?
>>>>
>>>>
>>>> Cheers,
>>>>
>>>> Ramesh.
>>>>
>>>>
>>>>
>>>>
>>>> On 27/10/2012 4:33 AM, Shane Morris wrote:
>>>>>
>>>>> Hi all,
>>>>>
>>>>> Just as an update, I've cloned the git repo for RPi, and it has what
>>>>> should be the 3.2.27+ kernel source in it. Unfortunately for me, when
>>>>> I go to "make" Zaptel, it still tells me I don't have the required
>>>>> kernel sources. Now, I have put the symbolic links in the /usr/src
>>>>> directory, still no dice.
>>>>>
>>>>> I have just checked the github.com site, and lo and behold, 3.2.27+ -
>>>>> hmmm, rather interesting.
>>>>>
>>>>> Is there any other processes or files that I may still require to try
>>>>> to get the thing to realise I've just downloaded the kernel source?
>>>>>
>>>>> Many thanks for your help...!
>>>>>
>>>>> Shane.
>>>>>
>>>>> On Sat, Oct 27, 2012 at 1:43 PM, Shane Morris <edgecomberts at gmail.com>
>>>>> wrote:
>>>>>>
>>>>>> Hi mate!
>>>>>>
>>>>>> I've had Real Life (TM) intervene in the meantime since my last email,
>>>>>> and I've not been able to invest any time in the project.
>>>>>>
>>>>>> Additionally, theres not been any responses to my post on the RPi
>>>>>> forums regards the information I need to get the kernel sources needed
>>>>>> to compile the Zaptel drivers, and potentially the Asterisk
>>>>>> implementation. I've just checked.
>>>>>>
>>>>>> Its rather unfortunate, I'm sure I'm not the only one asking for
>>>>>> kernel driver source. However, as a point of interest, if you want to
>>>>>> port Plan9 to RPi, you can now do so, the video drivers are open
>>>>>> source...
>>>>>>
>>>>>> There is a git repo that I can get the details for you again, if
>>>>>> needed. The only reason I haven't downloaded this was the fact its
>>>>>> over 200MB, and I have a data limit of 2,000MB per fortnight. I have a
>>>>>> little extra data at the moment, I might hook it all back up again
>>>>>> tomorrow, and try downloading the git. Set it to download before I go
>>>>>> to sleep, wake up again about 5am, and see where I'm up to.
>>>>>>
>>>>>> I'm not sure how helpful this is for you, at this present time. If I
>>>>>> can help out in any other way, let me know, I'll see what I can come
>>>>>> up with. To get URIs working with the RPi would solve next years radio
>>>>>> application, our redesign of the RTCM won't be ready by early October
>>>>>> next year.
>>>>>>
>>>>>> Actually, I'm going to go hook the RPi back up to its monitor and
>>>>>> cabling (I have a VESA mount plate for it), and get it working on the
>>>>>> network again - as mentioned, I'll set it to download just before I
>>>>>> take my tablets tonight, and let it run in off peak, hopefully there
>>>>>> isn't too much HSPA traffic on my local cell.
>>>>>>
>>>>>> If the git is downloaded by tomorrow morning, I'll have a crack at
>>>>>> those kernel sources, and see if I can get Zaptel working. If that
>>>>>> works, then Asterisk should fall into line after it. All being well.
>>>>>>
>>>>>> Now if only the local electronics shop could get me the 5 pin DIN
>>>>>> plugs and sockets I've ordered so I can hook up my SRM9000 to my
>>>>>> URI...
>>>>>>
>>>>>> Hope this helps, even if we both know it isn't much at this point. Let
>>>>>> me know if theres anything else I can do.
>>>>>>
>>>>>> Shane.
>>>>>>
>>>>>> On Sat, Oct 27, 2012 at 1:16 PM, Ramesh Dhami (VA3UV) <Ramesh at va3uv.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hi Shane!
>>>>>>>
>>>>>>> Having got a few Raspberry Pi's going with my FREE STAR* project
>>>>>>> (www.freestar.us), I thought I'd give app_rpt a try.... I am also using
>>>>>>> the
>>>>>>> Raspbian "Wheezy" distro.
>>>>>>>
>>>>>>> How did you get the 'kernel-dev' package installed?
>>>>>>>
>>>>>>> I have tried a few different methods...
>>>>>>>
>>>>>>> apt-get install make gcc linux-headers-`uname -r`
>>>>>>>
>>>>>>> apt-get install raspberrypi-kernel-devel
>>>>>>>
>>>>>>> apt-get install linux-kernel-devel (-dev as well)
>>>>>>>
>>>>>>>
>>>>>>> And no joy!!!
>>>>>>>
>>>>>>> Do tell....
>>>>>>>
>>>>>>> Cheers!
>>>>>>>
>>>>>>> Ramesh.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 12/10/2012 2:16 AM, Shane Morris wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> Hello all,
>>>>>>>>
>>>>>>>> I am using Raspbian on the RaspberryPi, which is a "wheezy" image,
>>>>>>>> upgraded to the latest kernels, using an aptitude copy of dahdi.
>>>>>>>>
>>>>>>>> I SVN checked out 1.4.23-pre of Asterisk as per the link on the Drupal
>>>>>>>> site, and have been mulling over the various issues as they popped up
>>>>>>>> during compilation.
>>>>>>>>
>>>>>>>> Where I've hit a brick wall is the "usb.h" file needed by
>>>>>>>> chan_simpleusb.c. I've had a poke around the guts of my Raspbian
>>>>>>>> install and tried a few files from the headers src package, but
>>>>>>>> nothing seems to work.
>>>>>>>>
>>>>>>>> I've also installed libusb2-dev from aptitude, again, to no avail in
>>>>>>>> terms of placing a "usb.h" file into the /usr/local/include/ folder.
>>>>>>>>
>>>>>>>> So, my question is this: while I can find plenty of references to
>>>>>>>> "usb.h" in the source files on the various repos on the net, I'm
>>>>>>>> unable to find a copy of the actual "usb.h" file - if someone could
>>>>>>>> shed some light on where I could potentially wget this file from
>>>>>>>> straight into my include folder, that would be great.
>>>>>>>>
>>>>>>>> As for my application, I'm using a RaspberryPi for the fact its very
>>>>>>>> low powered, and since I'll be using a 10Ahr Lithium solar/
>>>>>>>> performance car battery (started off as solar cells, were adapted to
>>>>>>>> performance cars like the Subaru WRX) and a solar panel/ controller, I
>>>>>>>> can gain autonomy over a weekend operating period. In short, I don't
>>>>>>>> want to drag a generator to the remote base to top off the batteries
>>>>>>>> if I can help it.
>>>>>>>>
>>>>>>>> The URI will be hooked to the Pi on one end, and a Simoco SRM9005 on
>>>>>>>> the other end, through a set of custom cables I'm (slowly) soldering
>>>>>>>> up. I did some more work on them today in terms of the DB25 to URIx
>>>>>>>> cable (which will go to a 5 pin DIN socket, then 5 pin DIN plug to
>>>>>>>> DB15 on the Simoco).
>>>>>>>>
>>>>>>>> On the client end I'll be using IAXRpt on my Macbook Air, which has
>>>>>>>> OSX 10.7 and the latest, sound enabled, WiNE package, along with
>>>>>>>> Winebottler wrapper program to make it nice and GUI like for me - not
>>>>>>>> that I'm afraid of a command line, I just like some things to be
>>>>>>>> simple, and sometimes our PEKAC troubleshooting has to be done with
>>>>>>>> non-experienced personnel, who would faint at the sight of a CLI.
>>>>>>>>
>>>>>>>> I've also got a Linksys SPA942 I want to try in terms of VOX
>>>>>>>> activation, but thats a secondary concern now I've got IAXRpt working
>>>>>>>> successfully on my Mac.
>>>>>>>>
>>>>>>>> Of course, success (under test conditions) will be I press "Ctrl" on
>>>>>>>> the Mac, and I hear my voice come out the SRM9025 head, and vice
>>>>>>>> versa, PTT the SRM9025 head and hear it come out the laptop. This will
>>>>>>>> be interesting, as the MBA doesn't have a microphone port, only a
>>>>>>>> built-in mic, and the Bluetooth stereo input device I bought at Aldi
>>>>>>>> didn't work... I also want a DJs "stick" headphone, as my role in
>>>>>>>> these weekend expeditions is PEKAC and general support, as well as
>>>>>>>> some operation - apparently I have a good, strong radio voice.
>>>>>>>>
>>>>>>>> Ok, enough rambling, as you can see, I'm using the various properties
>>>>>>>> of the systems to gain advantage over say a vanilla Limey Linux
>>>>>>>> install on an Atom. Plus I like ARM. I like a challenge, and if I were
>>>>>>>> to get this working, I'm sure my friend Andrew will be able to use my
>>>>>>>> Raspbian image on his Pis to make further remote bases for next years
>>>>>>>> expedition at Marramarra National Park. He has more Pis and Simocos
>>>>>>>> than me...
>>>>>>>>
>>>>>>>> Thanks in advance for any help you guys can give - I'll be interested
>>>>>>>> to hear your responses.
>>>>>>>> _______________________________________________
>>>>>>>> App_rpt-users mailing list
>>>>>>>> App_rpt-users at ohnosec.org
>>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



More information about the App_rpt-users mailing list