[App_rpt-users] Voter Question

Tim Sawyer tim.sawyer at me.com
Sat Apr 20 11:18:13 EDT 2013


See the micro-node.com site or allstarlink.org under projects. You can build your own as it's all open source. There is a complete parts list on the allstalink site. If anyone is interested I have 3 kits that were never completed. Contact me off list if interested. 

--
Tim
:wq

On Apr 20, 2013, at 8:01 AM, pete M <petem001 at hotmail.com> wrote:

> Ok but that did not answer the question. What is an rtcm made of and what is neede to make one.
> 
> I know micro-node make some great device. But I like to do stuff myself. For I am a cheap bastard ( that why I have 3 URI at home ) ...
> 
> 
> Envoyé de mon iPad
> 
> Le 20 Apr 2013 à 10:21, "Tim Sawyer" <tim.sawyer at me.com> a écrit :
> 
>> Those changes are on the server. The client (the RTCM) has no config files, all settings are done through a menu.
>> 
>> The one line in rpt.conf that changes is:
>> 
>> rxchannel = Voter/1234                  ; Voter node 1234
>> --
>> Tim
>> :wq
>> 
>> On Apr 20, 2013, at 6:47 AM, Corey Dean <n3fe at repeater.net> wrote:
>> 
>>> I am assuming the changes you mention below are for the client (voter) side of things.  Where do I find the server side setup?  I will still need to know the one line change in rpt.conf.  
>>> 
>>> Corey N3FE
>>> ________________________________________
>>> From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer [tim.sawyer at me.com]
>>> Sent: Friday, April 19, 2013 11:27 PM
>>> To: app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Voter Question
>>> 
>>> Yes, ACID is the distro that is used with RTCM voting. The difference between a URI and a RTCM set up is minimal. Only one line in rpt.conf needs to be changed.  One file, voter.conf is added to the ACID config. That's the entire difference. There is an example voter.conf here: http://ohnosec.org/drupal/node/180. Complete RTCM documentation is available from the micro-node site here: http://206.212.254.21/unode_docs/rtcm_%20manual.pdf
>>> 
>>> --
>>> Tim
>>> :wq
>>> 
>>> On Apr 19, 2013, at 6:37 PM, Corey Dean <n3fe at repeater.net> wrote:
>>> 
>>>> Hopefully this will change the subject at hand...
>>>> 
>>>> I was reading about the acid voters and had a question or more.
>>>> 
>>>> I currently run the voting in Zipar so I am not familiar with the way the voter works in the ACID distro.  I am trying to understand a few thing in ACID to help a friend.  I have seen the rtcm that will act as a voting interface as well as the voting card.  Can a regular acid install on a computer be used as a voter as well?  If so is their any documentation for this?  I know a GPS could be connected up to the computer and a radio with true discriminator audio should do the job.  I am just curious if the computer with the ACID distro can also be used as a voter with the right configuration.
>>>> 
>>>> Corey  N3FE
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> --
>>> This message was scanned and is believed to be clean.
>>> Click here to report this message as spam.
>>> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=0ACA61FA3.A8987
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list