[App_rpt-users] [Bulk] Issue with Hangup after first keying

Benjamin Naber benjamin at kb9lfz.com
Wed Jul 3 16:37:09 EDT 2013


sounds to me you are using a simplex node.

In your simpleusb.conf or usbradio.conf, ensure duplex=0, and not
duplex=1. This is different from duplex= in rpt.conf

I had the same symptoms when I first setup my node.

Also, make sure you use the radio-tune-menu with a service monitor or
some other methods to make sure your have good, clean audio being
transmitted over the internet and over your node radio.


~Benjamin, KB9LFZ


On Wed, 2013-07-03 at 13:58 -0600, Joshua Hintze wrote:
> Hello,
> 
>  
> 
> It is my first posting on here. I have ALMOST gotten the ACID
> installation working. I'm using the URI interfaced to ACID and to my
> radio. The asterisk can properly key the radio and its working just
> fine with that. I can also connect to the node with iaxRpt directly
> with no problem and transmit OUT of my radio.
> 
>  
> 
> However I am having some issues when my radio receives communication
> in that as soon as I get my first radio RX, asterisk will then play a
> tone out of the URI into the radio over and over again at about a one
> second interval. In the asterisk terminal it just keeps repeating:
> 
>  
> 
>     -- Hungup 'Zap/pseudo-1726358622'
> 
>     -- Hungup 'Zap/pseudo-1774817359'
> 
>     -- Hungup 'Zap/pseudo-691532115'
> 
>     -- Hungup 'Zap/pseudo-81389311'
> 
>     -- Hungup 'Zap/pseudo-465154784'
> 
>    -- Hungup 'Zap/pseudo-627058532'
> 
>     -- Hungup 'Zap/pseudo-1656870264'
> 
>     -- Hungup 'Zap/pseudo-1671691803'
> 
>     -- Hungup 'Zap/pseudo-50274194'
> 
>  
> 
> forever keeping my radio always keyed.
> 
>  
> 
> I have the COR from the radio going into the URI. I do not plan on
> using CTCSS and have tried tying it to ground as well as tying it to
> the COR as well. My usbradio.conf has the following:
> 
>  
> 
> carrierfrom=usb
> 
> ctcssfrom=no
> 
>  
> 
> I have tried also ctcssfrom=usb as well.
> 
>  
> 
> Any help would be appreciated.
> 
>  
> 
> Thanks,
> 
>  
> 
> Josh
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users





More information about the App_rpt-users mailing list