[App_rpt-users] Compile Errors

Robert Garcia robert at n5qm.com
Thu Jul 4 16:45:33 EDT 2013


Jim,

So, you have compiled using a 3.x kernel using dahdi?  Did you compile
libpri as well, or is it even necessary since we aren't using PRI
signaling?

Robert
N5QM

On Thu, Jul 4, 2013 at 3:29 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> ahhhhh.. sure...
>
> If you wanna "go where do man has gone before" (or not many, actually),
> I have included a very minimal patch set which will "fix" DAHDI so that
> it actually works, and you can try using DAHDI instead...
>
> Jim
>
>> Date: Thu, 4 Jul 2013 15:11:08 -0500
>> From: robert at n5qm.com
>> CC: app_rpt-users at ohnosec.org
>
>> Subject: Re: [App_rpt-users] Compile Errors
>>
>> I guess I should have researched that before I tried huh? lol
>>
>> Robert
>> N5QM
>>
>> On Thu, Jul 4, 2013 at 2:37 PM, Jim Duuuude <telesistant at hotmail.com>
>> wrote:
>> > I guess that's not GIGANTICALLY surprising, since Zaptel isn't even
>> > CAPABLE of being compiled under a 3.X kernel, since there was a
>> > major change in the ioctl() functionality in the driver stuff.
>> >
>> > Jim
>> >
>> >> Date: Thu, 4 Jul 2013 11:58:44 -0500
>> >> From: robert at n5qm.com
>> >> To: app_rpt-users at ohnosec.org
>> >> Subject: Re: [App_rpt-users] Compile Errors
>> >
>> >>
>> >> This appears to be an issue trying to compile against the 3.2 kernel.
>> >> I tried on a 2.6 kernel and the issues were gone.
>> >>
>> >> Robert
>> >> N5QM
>> >>
>> >> On Sun, Jun 30, 2013 at 6:05 PM, Robert Garcia <robert at n5qm.com> wrote:
>> >> > Guys,
>> >> >
>> >> > I am working on compiling app_rpt for another platform using the
>> >> > sources from svn and following the makefile. It looks like I am going
>> >> > to need some help as I am already stuck at configuring zaptel. lol
>> >> >
>> >> > gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o
>> >> > mxml/libmxml.a mxml/libmxml.a
>> >> > make[2]: Leaving directory `/home/tc/zaptel/menuselect'
>> >> > make[1]: Leaving directory `/home/tc/zaptel/menuselect'
>> >> >
>> >> > ***********************************************************
>> >> > The existing menuselect.makeopts file did not specify
>> >> > that 'zttool' should not be included. However, either some
>> >> > dependencies for this module were not found or a
>> >> > conflict exists.
>> >> >
>> >> > Either run 'make menuselect' or remove the existing
>> >> > menuselect.makeopts file to resolve this issue.
>> >> > ***********************************************************
>> >> >
>> >> > make: *** [menuselect.makeopts] Error 255
>> >> >
>> >> > I then nuked the menuselect.makeopts per the error and tried again, I
>> >> > get a little further before receiving this error.
>> >> >
>> >> > make -C /lib/modules/3.0.21-tinycore/build ARCH=i386
>> >> > SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes
>> >> > KBUILD_OBJ_M="zaptel.o ztdummy.o ztdynamic.o zttranscode.o " modules
>> >> > make[2]: Entering directory
>> >> > `/usr/local/src/linux-headers-3.0.21-tinycore'
>> >> > CC [M] /usr/src/zaptel/kernel/zaptel-base.o
>> >> > In file included from /usr/src/zaptel/kernel/zaptel-base.c:37:0:
>> >> > /usr/src/zaptel/kernel/zconfig.h:26:28: fatal error:
>> >> > linux/autoconf.h:
>> >> > No such file or directory
>> >> > compilation terminated.
>> >> > make[3]: *** [/usr/src/zaptel/kernel/zaptel-base.o] Error 1
>> >> > make[2]: *** [_module_/usr/src/zaptel/kernel] Error 2
>> >> > make[2]: Leaving directory
>> >> > `/usr/local/src/linux-headers-3.0.21-tinycore'
>> >> > make[1]: *** [modules] Error 2
>> >> > make[1]: Leaving directory `/usr/src/zaptel'
>> >> > make: *** [all] Error 2
>> >> > make: Leaving directory `/usr/src/zaptel'
>> >> >
>> >> > Oddly, the linux/autoconf.h file is there, so I'm not sure what path
>> >> > is the base. I "fixed" that by providing an absolute path to the
>> >> > autoconf.h file. Then I tried again and received this.
>> >> >
>> >> > make -C /lib/modules/3.0.21-tinycore/build ARCH=i386
>> >> > SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes
>> >> > KBUILD_OBJ_M="zaptel.o ztdummy.o ztdynamic.o zttranscode.o " modules
>> >> > make[2]: Entering directory
>> >> > `/usr/local/src/linux-headers-3.0.21-tinycore'
>> >> > CC [M] /usr/src/zaptel/kernel/zaptel-base.o
>> >> > /usr/src/zaptel/kernel/zaptel-base.c: In function 'zt_rbs_sethook':
>> >> > /usr/src/zaptel/kernel/zaptel-base.c:2160:2: warning: suggest
>> >> > parentheses around operand of '!' or change '&' to '&&' or '!' to '~'
>> >> > [-Wparentheses]
>> >> > /usr/src/zaptel/kernel/zaptel-base.c: At top level:
>> >> > /usr/src/zaptel/kernel/zaptel-base.c:7650:2: error: unknown field
>> >> > 'ioctl' specified in initializer
>> >> > /usr/src/zaptel/kernel/zaptel-base.c:7650:2: warning: initialization
>> >> > from incompatible pointer type [enabled by default]
>> >> > /usr/src/zaptel/kernel/zaptel-base.c:7650:2: warning: (near
>> >> > initialization for 'zt_fops.fsync') [enabled by default]
>> >> > make[3]: *** [/usr/src/zaptel/kernel/zaptel-base.o] Error 1
>> >> > make[2]: *** [_module_/usr/src/zaptel/kernel] Error 2
>> >> > make[2]: Leaving directory
>> >> > `/usr/local/src/linux-headers-3.0.21-tinycore'
>> >> > make[1]: *** [modules] Error 2
>> >> > make[1]: Leaving directory `/usr/src/zaptel'
>> >> > make: *** [all] Error 2
>> >> > make: Leaving directory `/usr/src/zaptel'
>> >> >
>> >> > Any ideas on how I can get past this?
>> >> >
>> >> > Robert
>> >> > N5QM
>> >> _______________________________________________
>> >> App_rpt-users mailing list
>> >> App_rpt-users at ohnosec.org
>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



More information about the App_rpt-users mailing list