[App_rpt-users] PL Encode Disable
tim.sawyer at me.com
Fri Jul 26 23:49:10 EDT 2013
You might be able to do something with the event management system. Please read this http://ohnosec.org/drupal/node/176
On Jul 26, 2013, at 7:44 PM, Matthew Pitts <daywalker_blade_2004 at yahoo.com> wrote:
> In essence, what you want is to allow PL for normal operation, but have repeater ID an "random announcements" not have it, so users only hear actual repeater activity if they have a receive PL tone set, correct?
> Matthew Pitts
> From: Robert Garcia <robert at n5qm.com>
> To: Tim Sawyer <tim.sawyer at me.com>
> Cc: APP_RPT <app_rpt-users at ohnosec.org>
> Sent: Friday, July 26, 2013 10:25 PM
> Subject: Re: [App_rpt-users] PL Encode Disable
> My goal is to not have IDs encoded with a PL tone.
> I need to trigger an output pin on the URI to do so using SimpleUSB to tell the repeater not to send a PL with the current audio.
> I hope that is a better explanation.
> On Friday, July 26, 2013, Tim Sawyer wrote:
> IDs and system messages can be disabled with configuration setting in rpt.conf. But, from your email, it's not clear what you want to do.
> On Jul 26, 2013, at 4:12 PM, Robert Garcia <robert at n5qm.com> wrote:
> > All,
> > I have sifted through the documentation, but I haven't been able to
> > find much that directly relates to this.
> > When using simpleusb as an interface, can you setup one of the I/Os to
> > trigger a PL enable or disable input on a radio? The goal would be to
> > disable IDs and system messages from being encoded as is normally
> > configured on external controllers.
> > Robert
> > N5QM
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users