[App_rpt-users] URI remote base question

Robert A. Poff wb3awj at comcast.net
Tue Jul 30 19:04:32 EDT 2013


I run a 706 as a simplex base at home.
With a URI connected to the data/packet connector.

Set the  "packet speed" parameter (sorry I can't remember the actual name) in the radio to 9600. Then I use the software DSP . Let the software do the de-emphasis/PL decode. And let the radio do PL encode and pre- emphasis.

I haven't tried it yet as a frequency agile remote.

No GPIO to deal with.

Ross Johnson <kc7rjk at comcast.net> wrote:
>Hello group,
>I’m new to the list, fairly new to Allstar as well, and love the
>systems flexibility great work everyone.
>
>I’m adding a IC706 remote base to my system. I was hoping to use the
>URI for this job but in going through the documents I see the the
>wiring schematic is detailed for the 4 port PCI interface. Can a URI be
>used in it’s place using the GPOI’s of the URI in place of the UIO’s of
>the PCI interface. Here’s the diagram I was using to interface the 706.
>http://images.ohnosec.org/ic706.pdf 
>
>If this is not possible what would be the best alternative? For
>instance using an rs232 interface for control with the uri or FOB for
>audio and PTT/COR? 
>
>Again thanks for your time.
>
>Ross
>kc7rjk Eugene OR
>29649-29651
>www.kc7rjk.net
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130730/5f60aef6/attachment.html>


More information about the App_rpt-users mailing list