[App_rpt-users] DTMF Variables

Robert A. Poff wb3awj at comcast.net
Wed Jul 31 00:02:32 EDT 2013

If you define the two in their respective rpt.conf nodes stanza, and have a function codes assigned to ilink,3 and ilink ,1 the private node should be able to connect directly.

Something like this....
In the public node
radio at,NONE.                 ; the public node
radio at XXX.XXX.XXX.xxx:4569/1701,NONE.    ; the private node

Where XXX.XXX.XXX.XXX is the address of the private node, and1701 is it's number.

On the private node:
radio at,NONE
radio at yyy.yyy.yyy.yyy:4569/29728,NONE

Where yyy.yyy.yyy.yyy is the address of the public node.

In fact, I think you'll need to do this anyhow since the private node won't appear or get directory information from the Allstar portal.

Once that's in place, just a matter of dialing *329728 at the private node.

If you wanted to make it shorter dialing....
 Define two macros:
60 = *129728.    ; disconnect
61 = *329728.    ; connect

The user can dial (and easily remember) *561 to connect, and *560 to disconnect

Robert Garcia <robert at n5qm.com> wrote:
>Is it possible to pass a variable via DTMF to a macro?  Let me explain
>my goal..
>Private Node <-> Public Hub
>I would like a user on the private node to be able to link or unlink
>the hub node without having to go through the *4 remote command
>process to do it.
>In practice, I would like to use a macro like *5329728 from the
>Private Node and have the Public Hub connect to node 29728, is this
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org

Sent from my Android phone with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130731/ffba2191/attachment.html>

More information about the App_rpt-users mailing list