[App_rpt-users] DTMF Variables

Robert Garcia robert at n5qm.com
Wed Jul 31 00:20:18 EDT 2013


Robert,

Thanks for responding...  I am good with the config as you have
described and it is already set that way.  What I am trying to figure
out is a way to shorten the DTMF command sequence from the Private
node to get the Public node to connect to another public node.

For example, instead of *4PUBLIC *3OTHERPUBLIC# something like *53OTHERPUBLIC

I hope that makes sense..

Robert
N5QM

On Tue, Jul 30, 2013 at 11:02 PM, Robert A. Poff <wb3awj at comcast.net> wrote:
> If you define the two in their respective rpt.conf nodes stanza, and have a
> function codes assigned to ilink,3 and ilink ,1 the private node should be
> able to connect directly.
>
> Something like this....
> In the public node
> [nodes]
> radio at 127.0.0.1:4569/29728,NONE. ; the public node
> radio at XXX.XXX.XXX.xxx:4569/1701,NONE. ; the private node
>
> Where XXX.XXX.XXX.XXX is the address of the private node, and1701 is it's
> number.
>
> On the private node:
> [nodes]
> radio at 127.0.0.1:4569/1701,NONE
> radio at yyy.yyy.yyy.yyy:4569/29728,NONE
>
> Where yyy.yyy.yyy.yyy is the address of the public node.
>
> In fact, I think you'll need to do this anyhow since the private node won't
> appear or get directory information from the Allstar portal.
>
> Once that's in place, just a matter of dialing *329728 at the private node.
>
> If you wanted to make it shorter dialing....
> Define two macros:
> [macro]
> 60 = *129728. ; disconnect
> 61 = *329728. ; connect
>
> The user can dial (and easily remember) *561 to connect, and *560 to
> disconnect
>
>
> Robert Garcia <robert at n5qm.com> wrote:
>>
>> All,
>>
>> Is it possible to pass a variable via DTMF to a macro?  Let me explain my
>> goal..
>>
>> Private Node <-> Public Hub
>>
>> I would like a user on the private node to be able to link or unlink
>> the hub node without having to go through the *4 remote command
>> process to do it.
>>
>> In practice, I would like to use a macro like *5329728 from the
>> Private Node and have the Public Hub connect to node 29728, is this
>> possible?
>>
>> Robert
>> N5QM
>> ________________________________
>>
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>



More information about the App_rpt-users mailing list