[App_rpt-users] DTMF Variables

Tim Sawyer tim.sawyer at me.com
Wed Jul 31 00:33:13 EDT 2013

Assuming you already have the public and private nodes setup, and assuming the private node and public node are connected, on the private node add a macro like so:

1 = *4xxxxx*329728#
2 = *4xxxxx*129728#

where xxxxx = your public node. the # is needed to complete the *4 (ie to terminate remote command)

On Jul 30, 2013, at 7:43 PM, Robert Garcia <robert at n5qm.com> wrote:

> All,
> Is it possible to pass a variable via DTMF to a macro?  Let me explain my goal..
> Private Node <-> Public Hub
> I would like a user on the private node to be able to link or unlink
> the hub node without having to go through the *4 remote command
> process to do it.
> In practice, I would like to use a macro like *5329728 from the
> Private Node and have the Public Hub connect to node 29728, is this
> possible?
> Robert
> N5QM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

More information about the App_rpt-users mailing list