[App_rpt-users] DTMF Variables
telesistant at hotmail.com
Wed Jul 31 00:54:21 EDT 2013
Wow, all this discussion about macro-oni is getting me hungry!! :-) :-)
> From: tim.sawyer at me.com
> Date: Tue, 30 Jul 2013 21:33:13 -0700
> To: App_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] DTMF Variables
> Assuming you already have the public and private nodes setup, and assuming the private node and public node are connected, on the private node add a macro like so:
> 1 = *4xxxxx*329728#
> 2 = *4xxxxx*129728#
> where xxxxx = your public node. the # is needed to complete the *4 (ie to terminate remote command)
> On Jul 30, 2013, at 7:43 PM, Robert Garcia <robert at n5qm.com> wrote:
> > All,
> > Is it possible to pass a variable via DTMF to a macro? Let me explain my goal..
> > Private Node <-> Public Hub
> > I would like a user on the private node to be able to link or unlink
> > the hub node without having to go through the *4 remote command
> > process to do it.
> > In practice, I would like to use a macro like *5329728 from the
> > Private Node and have the Public Hub connect to node 29728, is this
> > possible?
> > Robert
> > N5QM
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users