[App_rpt-users] Simplest voting configurating?

Paul Schlacter paulschlaterradio at gmail.com
Sat Jun 15 02:51:00 EDT 2013


Very good. How might I get my hands on some of these "real world" examples?
This would be extremely helpful, and useful for familiarizing myself.


On Fri, Jun 14, 2013 at 11:32 PM, Jim Duuuude <telesistant at hotmail.com>wrote:

> For starters, upgrade to SVN sources:
>
> https://allstarlink.org/support.html#astupgrade
>
> Then read the configuration info in either:
>
> http://206.212.254.21/unode_docs/rtcm_%20manual.pdf
>
> Or
>
> https://allstarlink.org/votersystem.pdf
>
> As I recall, there are some more-or-less real-world examples in there that
> will get you
> in the ballpark.
>
> Jim WB6NIL
>
>
> ------------------------------
> Date: Fri, 14 Jun 2013 22:59:23 -0700
> From: paulschlaterradio at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Simplest voting configurating?
>
>
> Good Evening Group,
> What is the easiest process for taking an out-of-the box ACID installation
> and configuring an app_rpt and chan_voter to act as a voting server for
> three RTCMs sitting on a LAN? I know that this is a very broad question,
> but even for linux and asterisk newbies, there seems to be more than one
> "right way".
>
> Any help will be greatly appreciated, and be going to a charitable cause.
>
> Thank you,
> Paul
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130614/0e6dd837/attachment.html>


More information about the App_rpt-users mailing list