[App_rpt-users] Simplest voting configurating?

Jim Duuuude telesistant at hotmail.com
Sat Jun 15 03:08:47 EDT 2013


"more-or-less real-world"... just read the PDFs referred to below (I think the examples are
the same in both of those).

Jim

Date: Fri, 14 Jun 2013 23:51:00 -0700
Subject: Re: [App_rpt-users] Simplest voting configurating?
From: paulschlaterradio at gmail.com
To: telesistant at hotmail.com
CC: app_rpt-users at ohnosec.org

Very good. How might I get my hands on some of these "real world" examples? This would be extremely helpful, and useful for familiarizing myself. 


On Fri, Jun 14, 2013 at 11:32 PM, Jim Duuuude <telesistant at hotmail.com> wrote:




For starters, upgrade to SVN sources:

https://allstarlink.org/support.html#astupgrade

Then read the configuration info in either:


http://206.212.254.21/unode_docs/rtcm_%20manual.pdf

Or

https://allstarlink.org/votersystem.pdf


As I recall, there are some more-or-less real-world examples in there that will get you
in the ballpark.

Jim WB6NIL


Date: Fri, 14 Jun 2013 22:59:23 -0700
From: paulschlaterradio at gmail.com

To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Simplest voting configurating?

Good Evening Group, What is the easiest process for taking an out-of-the box ACID installation and configuring an app_rpt and chan_voter to act as a voting server for three RTCMs sitting on a LAN? I know that this is a very broad question, but even for linux and asterisk newbies, there seems to be more than one "right way". 


Any help will be greatly appreciated, and be going to a charitable cause. 
Thank you, Paul 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130615/6039f148/attachment.html>


More information about the App_rpt-users mailing list