[App_rpt-users] EMI/RFI issue

Jim Duuuude telesistant at hotmail.com
Sun Jun 16 00:46:59 EDT 2013


Perhaps a:

RadioShack® Snap-Together Ferrite Choke Core (273-105)
might do the trick, or maybe a:

Snap Choke Core (273-069)

or something similar.

Jim WB6NIL

> From: Benjamin at kb9lfz.com
> To: app_rpt-users at ohnosec.org; Repeater-Builder at yahoogroups.com; radiomodifications at yahoogroups.com
> Date: Sat, 15 Jun 2013 23:58:39 -0400
> Subject: [App_rpt-users] EMI/RFI issue
> 
> Greetings All,
> 
> While thinking of a way I can turn my node into a portable allstar node,
> it has been discovered the computer I'm using, generates RFI/EMI over
> the DC power connection.
> 
> The setup is as follows presently, which has zero *known* EMI/RFI
> issues. The radio is powered with an older linear 3A regulated power
> supply, which a parallel connection to a 12V 18Ah battery. All leads are
> kept short, under two feet. The radio is kept on 5W.
> 
> The computer has a 12Vdc connection, and it's presently using an ac/dc
> SMPS, one that can be bought on eBay for about $10. 
> 
> Both of these are plugged into the same outlet strip, and as stated,
> zero discovered EMI/RFI issues.
> 
> The radio audio connections to the computer have the center conductors
> isolated with a 10nF cap. 
> 
> Just as soon as I decide to power the computer from the battery, the
> radio has noise across every tunable frequency. Even if I disconnect the
> radio completely from the node, there is noise on the radio. From what
> is apparent to me, the noise is coming from the computers internal power
> supply section, riding the power wires back to the battery, and then to
> the radio.
> 
> I see there are plenty of EMI/RFI filters I can purchase. However, I'd
> like to maintain the Amateur Radio Spirit of creation for this case, so
> I'd like some pointers on what I should test for, and construct some
> EMI/RFI filters.
> 
> I have seen there are common mode and differential mode chokes filters,
> and some filters have both kinds of chokes. I'm not really sure the
> difference, besides the way the components are installed in the circuit.
> 
> If you find it better to talk in person, contact me via allstar or look
> for my phone number on the internet.
> 
> ~Benjamin, KB9LFZ
> Allstar node 28569
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130615/2d306e6f/attachment.html>


More information about the App_rpt-users mailing list