[App_rpt-users] Courtesy Tones.....

James Hill g0fhmuk at gmail.com
Mon Jun 24 13:10:43 EDT 2013


Hi Mike,

I have a Simplex node, Hardware is Dell Latitude D600, connected to WLAN 
at 150mpbs. External ADSL is good, 15580mbps download speed. Running Top 
indicates:

top - 17:55:39 up 5 min,  2 users,  load average: 0.14, 0.22, 0.12
Tasks:  71 total,   2 running,  69 sleeping,   0 stopped,   0 zombie
Cpu(s):  2.3%us,  0.3%sy,  0.0%ni, 97.3%id,  0.0%wa,  0.0%hi, 0.0%si,  
0.0%st
Mem:    514596k total,   216224k used,   298372k free,    15360k buffers
Swap:  1020116k total,        0k used,  1020116k free,   139908k cached

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  2466 root      15   0 39152  18m 5584 S  2.7  3.6   0:10.81 asterisk
  2809 root      15   0  2312 1008  812 R  0.3  0.2   0:00.01 top

Interface is modified CM108 USB device.

The problem I have, is when unconnected to any node. When connected, all 
is good - When station TXing on the link drops their TX, courtesy pip. 
All good.

The Issue is obviously something local, as whenever a signal is RXed 
locally, the box responds with a courtesy pip and a CWID and then drops 
carrier. But then proceeds to key up numerous times (anywhere between 6 
& 14 at the last count), each key up giving a pip and then dropping 
carrier. If I go into rpt.conf and set unlinkedct=0, it will still key 
up multiple times - but no tone.

If I set duplex=0, the problem goes away (but I get no courtesy tones - 
but I still get "function complete" etc ok).

Something is looping somewhere.... it's just a case of trying to find it!

rpt.conf is pasted below!

Cheers,

James

[29681]                                 ; Change this to your assigned 
node number

rxchannel=Radio/usb29681
duplex=1
erxgain=-6
etxgain=-6
;controlstates=controlstates
scheduler=schedule29681
morse=morse29681
macro=macro29681
functions=functions29681
phone_functions=functions29681
link_functions=functions29681
telemetry=telemetry
wait_times=wait-times
context =  radio
callerid = "Repeater" <0000000000>
idrecording = |iG0FHM F
accountcode=RADIO
hangtime=50
althangtime=100
totime=170000
idtime=300000
;politeid=3000
linktolink=1
idtalkover=|iG0FHM F
unlinkedct=ct1
remotect=ct1
remotetx=ct1
linkunkeyct=ct1
nolocallinkct=1
;eannmode=1
;connpgm=yourconnectprogram
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=0
holdofftelem=0
;beaconing=1
;
; *** Status Reporting ***
;
; Uncomment the either group following two statpost lines to report the 
status of your node to stats.allstarlink.org
; depending on whether you are running ACID or Limey Linux.

; ** For ACID ***
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates

; ** For Limey Linux **
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates

;
; Morse code parameters, these are common to all repeaters.
;

[morse29681]

speed=30
frequency=800
amplitude=4096
idfrequency=800
idamplitude=1024
[schedule29681]
;dtmf_function =  m h dom mon dow  ; ala cron, star is implied
80=00 * * * *
80=15 * * * *
80=30 * * * *
80=45 * * * *
81=00 * * * *


[functions29681]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,6
72=ilink,7
73=ilink,15
74=ilink,16
75=ilink,8

80=status,1
81=status,2

6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
0=autopatchdn                           ; Autopatch down

99=cop,43
980=status,3
;99=cop,6

; Place command macros here

[macro29681]
80=*80
81=*81

[telemetry]

;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct1=|t(2175,0,50,8192)
;ct2=|t(660,880,150,2048)
ct2=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000)
ct3=|t(2175,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048)
;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000)
remotetx=|t(2175,0,150,8192)
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
functcomplete=|t(350,0,100,8192)(500,0,100,8192)(660,0,100,8192)
;functcomplete=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
;functcomplete=|(2175,0,300,8192)
patchup=rpt/callproceeding
patchdown=rpt/callterminated

;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;

[wait-times]
telemwait=2750
idwait=2750
unkeywait=500
calltermwait=2000

;
; This is where you define your nodes which cam be connected to.

[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your locak nodes, and private (off of allstar link) nodes here.

;29681 = radio at 127.0.0.1/29681,NONE

; Memories for remote bases

[memory]

;00 = 146.580,100.0,m
;01 = 147.030,103.5,m+t
;02 = 147.240,103.5,m+t
;03 = 147.765,79.7,m-t
;04 = 146.460,100.0,m
;05 = 146.550,100.0,m


#includeifexists custom/rpt.conf





More information about the App_rpt-users mailing list