[App_rpt-users] Anyone Virtualizing?

Jonathan Weirmeir jonathan.weirmeir at gmail.com
Wed Jun 26 13:11:10 EDT 2013


Hi, group!

I'm new to app_rpt RoIP, coming from a background with IRLP.

I'm wondering if anyone has ever tried virtualizing AllStar, and if so,
were there any issues.

Thanks!

Jonathan
On Jun 23, 2013 10:39 PM, "Benjamin L. Naber" <Benjamin at kb9lfz.com> wrote:

> Robert,
>
> I am using a Neoware CA-22. It is both server and node on one machine. I
> do not have any other machines for my allstar node. While watching top,
> the CPU has yet to get busier than 0.4. It is using DSP for audio, and
> runs without fail.
>
> It has 12Vdc input with a standard barrel plug. Not sure what the low
> voltage cut-off is, but it runs fine on a SLA battery that just came
> from an auto charger that goes to float after bulk charging brings it up
> to 14.1V. The current draw varies, usually above 500mA at idle, and
> about 750mA when I'm talking to or listening on the node.
>
> It has a 1GHz processor, 1GB RAM and 1GB flash drive. I used what I had,
> but you will have space left over if you are only able to get 512MB RAM
> and 512MB flash.
>
> I don't remember if I am using Limey Linux for VIA or i686. I am
> thinking it's the for for i686 as I tried loading other linux distros
> for VIA on there before I got into allstar and they just plain sucked
> and didn't work for garbage.
>
> ~Benjamin, KB9LFZ
> allstar node 28569
>
>
> On Sun, 2013-06-23 at 20:50 -0500, Robert Garcia wrote:
> > All,
> >
> > I am looking for recommendations on small, preferably inexpensive,
> > systems that are capable of running on 12v to take advantage of the
> > redundant power systems at our sites.
> >
> > I would like it to support at least two nodes running simpleusb as I
> > don't need the DSP processing capabilities.  The idea is that these
> > systems would be connected to a port on an existing controller.
> >
> > I expect that HP thin clients are going to be my best bet, but there
> > seem to be many different models so I don't know where to begin.
> >
> > Suggestions or thoughts?
> >
> > Robert
> > N5QM
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130626/5e303514/attachment.html>


More information about the App_rpt-users mailing list