[App_rpt-users] Anyone Virtualizing?

David KE6UPI dshaw at ke6upi.com
Wed Jun 26 14:58:57 EDT 2013


The URI will not work with a virtual server. Not true. I have done it with
VMWare.


On Wed, Jun 26, 2013 at 11:44 AM, Kirk Just Kirk <wb6egr at gmail.com> wrote:

> Save the IRLP bashing for another day? Why.....just call it like it is. It
> was good in it's day...but so was AM Stereo,Betamax and Furby. IRLP will
> soon become a memory. After all....who pays $170 for a obsolete PCB with a
> SSI202 chip on it.....
> On Jun 26, 2013 8:37 AM, "Michael Hebert" <mhebert1975 at gmail.com> wrote:
>
>> The URI will not work with a virtual server.
>>
>>
>> On Wed, Jun 26, 2013 at 1:18 PM, Jonathan Weirmeir <
>> jonathan.weirmeir at gmail.com> wrote:
>>
>>> Just to be clear, I dumped IRLP a long time ago. Reasons include, but
>>> are not limited to, IRLP being a giant kludge. I'll save the IRLP bashing
>>> for another day.
>>>
>>> I like virtualizing for security reasons, as well as reducing the
>>> electric bill from having to run multiple different systems. I've had good
>>> results so far virtualizing with VirtualBox.
>>>
>>> Just wondering if AllStar plays well virtualized, especially with the
>>> URI and USB sound fobs.
>>>
>>> -J
>>>
>>>
>>> On Jun 26, 2013 1:16 PM, "Keith Goobie" <keith at goobie.org> wrote:
>>>
>>>>  Why virtualize (I am assuming you are thinking of a third party
>>>> product) – this is linux – a multi-tasking environment.  You can run both
>>>> on the same machine.
>>>>
>>>> Keith
>>>>
>>>>
>>>> On 6/26/13 1:11 PM, "Jonathan Weirmeir" <jonathan.weirmeir at gmail.com>
>>>> wrote:
>>>>
>>>> Hi, group!
>>>>
>>>> I'm new to app_rpt RoIP, coming from a background with IRLP.
>>>>
>>>> I'm wondering if anyone has ever tried virtualizing AllStar, and if so,
>>>> were there any issues.
>>>>
>>>> Thanks!
>>>>
>>>> Jonathan
>>>>
>>>> On Jun 23, 2013 10:39 PM, "Benjamin L. Naber" <Benjamin at kb9lfz.com>
>>>> wrote:
>>>>
>>>> Robert,
>>>>
>>>> I am using a Neoware CA-22. It is both server and node on one machine. I
>>>> do not have any other machines for my allstar node. While watching top,
>>>> the CPU has yet to get busier than 0.4. It is using DSP for audio, and
>>>> runs without fail.
>>>>
>>>> It has 12Vdc input with a standard barrel plug. Not sure what the low
>>>> voltage cut-off is, but it runs fine on a SLA battery that just came
>>>> from an auto charger that goes to float after bulk charging brings it up
>>>> to 14.1V. The current draw varies, usually above 500mA at idle, and
>>>> about 750mA when I'm talking to or listening on the node.
>>>>
>>>> It has a 1GHz processor, 1GB RAM and 1GB flash drive. I used what I had,
>>>> but you will have space left over if you are only able to get 512MB RAM
>>>> and 512MB flash.
>>>>
>>>> I don't remember if I am using Limey Linux for VIA or i686. I am
>>>> thinking it's the for for i686 as I tried loading other linux distros
>>>> for VIA on there before I got into allstar and they just plain sucked
>>>> and didn't work for garbage.
>>>>
>>>> ~Benjamin, KB9LFZ
>>>> allstar node 28569
>>>>
>>>>
>>>> On Sun, 2013-06-23 at 20:50 -0500, Robert Garcia wrote:
>>>> > All,
>>>> >
>>>> > I am looking for recommendations on small, preferably inexpensive,
>>>> > systems that are capable of running on 12v to take advantage of the
>>>> > redundant power systems at our sites.
>>>> >
>>>> > I would like it to support at least two nodes running simpleusb as I
>>>> > don't need the DSP processing capabilities.  The idea is that these
>>>> > systems would be connected to a port on an existing controller.
>>>> >
>>>> > I expect that HP thin clients are going to be my best bet, but there
>>>> > seem to be many different models so I don't know where to begin.
>>>> >
>>>> > Suggestions or thoughts?
>>>> >
>>>> > Robert
>>>> > N5QM
>>>> > _______________________________________________
>>>> > App_rpt-users mailing list
>>>> > App_rpt-users at ohnosec.org
>>>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>> ------------------------------
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>> --
>>>> keith at goobie.org
>>>> Keith Goobie
>>>> Richmond Hill, ON, CANADA
>>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130626/67bd2296/attachment.html>


More information about the App_rpt-users mailing list