[App_rpt-users] control of the tx tone

Keith Goobie keith at goobie.org
Fri May 3 21:03:13 EDT 2013


A good question, someone one else will have to respond, but after reloading
the config file, you could force it by the command.

rpt fun your_node_number *58

Keith


On 5/3/13 8:58 PM, "pete M" <petem001 at hotmail.com> wrote:

> A start up macro is another good idea.
> 
> Just one question.. Does the startup macro run even when we do a reload from
> the asterisk CLI?
> 
> 
> Envoyé de mon iPad
> 
> Le 3 May 2013 à 20:28, "Keith Goobie" <keith at goobie.org> a écrit :
> 
>> What about a startup macro?
>> 
>> Keith
>> 
>> 
>> On 5/3/13 8:26 PM, "Pierre Martel" <petem001 at hotmail.com> wrote:
>> 
>>> Thanks matt,
>>> 
>>> This would work, but is there a way to make it permanent?
>>> 
>>> like in rpt.conf or such?
>>> 
>>> 
>>> -----Message d'origine-----
>>> From: Matt Roberts
>>> Sent: Friday, May 03, 2013 7:56 PM
>>> To: Pierre Martel
>>> Cc: APP RPT
>>> Subject: Re: [App_rpt-users] control of the tx tone
>>> 
>>> 
>>> On May 3, 2013, at 7:35 PM, Pierre Martel <petem001 at hotmail.com> wrote:
>>> 
>>>> All is working ok, but I have a few friend that use my repeater with some
>>>> cross band repeater radio. And they have difficulty cutting in cause they
>>>> have to wait after the tail and ct. before there cross band repeat radio
>>>> give them the chance to tx back at the repeater.
>>>> 
>>>> On my old rc-210 we were able to stop encoding the ctcss tone while the
>>>> courtesy tone and tail of the repeater..So they were runnign ther xband
>>>> radio on tone squelch on rx and the tx on there side was fast and sharp.
>>>> 
>>>> Is there  a way to do the same with app_rpt?
>>> 
>>>> Yes! Take a look at cop commands 58 and 59.
>>> 
>>> *  58 - Tx CTCSS On Input only Enable
>>> *  59 - Tx CTCSS On Input only Disable
>>> 
>>> I have those commands defined so I can turn on and off using DTMF.
>>> 
>>> 
>>> Matt Roberts
>>> n9gmr at me.com
>>> Call Sign N9GMR
>>> Allstar 28142
>>> EchoLink 640860
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> -- 
>> keith at goobie.org
>> Keith Goobie
>> Richmond Hill, ON, CANADA
>> 
>> 

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA





More information about the App_rpt-users mailing list