[App_rpt-users] Re : Re: URI audio issue

pete M petem001 at hotmail.com
Sun May 26 15:08:17 EDT 2013

He is using the output of his repeater controler.

--- Message initial ---

De : "Ken" <ke2n at cs.com>
Envoyé : 26 mai 2013 14:48
A : area51now at aol.com, app_rpt-users at ohnosec.org
Objet : Re: [App_rpt-users] URI audio issue

The mic input (pin 9) goes direct to the chip with no attenuation or

If you put too much audio there, you can burn out the input of the chip.

It's pin 21 you want, as others have noted.

The input calibration routine will tell you if it is working ("radio tune
rxnoise" for starters)



From: area51now at aol.com [mailto:area51now at aol.com]
Sent: Saturday, May 25, 2013 3:16 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] URI audio issue

Hello I am new allstar and am working on converting my current echo link to
the allstar. I have it all hooked up to the repeater and i am not getting
any audio coming back over the internet I have the repeater receive audio
hooked to the mic input of the URI (it tried both inputs) and i have
verified there is audio present on that input. I have tried it in VOX, and
have inverted the cos signal but no audio. I welcome any input on this



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130526/b514e411/attachment.html>
-------------- next part --------------
App_rpt-users mailing list
App_rpt-users at ohnosec.org

More information about the App_rpt-users mailing list