[App_rpt-users] RXONDELAY not working?

Steve Passmore k6kya at hokeynet.net
Mon Sep 2 18:01:32 EDT 2013


Jim,  thanks for fixing that.   I've had a node sitting in the corner for
about 6 months because I needed that function.

Steve


On Fri, Aug 30, 2013 at 6:33 PM, Jim Duuuude <telesistant at hotmail.com>wrote:

>
> Well, it was indeed accurate that:
>
> 1) The "rxondelay" parameter in chan_simpleusb did not work or have any
> effect.
> 2) The software *DID* indeed fully and correctly support the "rxondelay"
> feature, with
>      one very specific exception: The parameter was *NEVER* read from the
> config file!!
>
> All I have to say on my part is: "DUH!!"
>
> The new version (one line change) which fixes this will appear publicly in
> SVN at 7:15 PDT this
> evening.
>
> Jim WB6NIL
>
>
> ------------------------------
> Date: Thu, 29 Aug 2013 21:36:08 -0700
> From: cypresstower at yahoo.com
> To: k5tra at austin.rr.com; george at dyb.com; app_rpt-users at ohnosec.org
>
> Subject: Re: [App_rpt-users] RXONDELAY not working?
>
> Rgr Tom, "I am using usbradio.conf".  Should have realized you were
> referring to.  I have a mobile node with limey linux and simpleusb.conf.  I
> owe you one so I'll test it and see what I come up with.
> Thanks
>
>   *From:* tom <k5tra at austin.rr.com>
> *To:* 'Johnny Keeker' <cypresstower at yahoo.com>; 'George Csahanin' <
> george at dyb.com>; app_rpt-users at ohnosec.org
> *Sent:* Thursday, August 29, 2013 10:15 PM
> *Subject:* RE: [App_rpt-users] RXONDELAY not working?
>
>   Johnny, I think you must be using usbradio instead of simpleusb (as we
> are). Both rxondelay and rxsquelchdelay are parameters in chan_usbradio.c.
> however, rxondelay is in chan_simpleusb.c while rxsquelchdelay is not. The
> problem is rxondelay doesn’t seem to work with simpleusb.
> Tom / K5TRA
>
>  *From:* Johnny Keeker [mailto:cypresstower at yahoo.com]
> *Sent:* Thursday, August 29, 2013 7:58 PM
> *To:* George Csahanin; tom; app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] RXONDELAY not working?
>
>    Conducting an experiment with rxondelay, I set my node at 1000ms and
> connected to another node on a different server that I'm able to monitor
> its transmitter.  I applied a signal to the receiver with rxondelay.  The
> transmitter on the connected node keys up and as I count to 10, No audio
> was present so I lowered the rxondelay by half, 500ms. Conducting the same
> test, I found that around the 6 count audio came out the transmitter.
> Lowering the rxondelay to 100ms, and got a count of 2 before hearing
> audio.  I determined that rxondelay is working. In my case it stops the
> ping pong effect. I find a 15ms delay is ideal for a gm300 receiver.  It
> would interesting if someone out there could conduct this same test....  I
> also found using rxsquelchdelay=XXms is another useful setting to eliminate
> any squelch tail noise, but it must be used with dsp or flat audio on ACID.
>   *From:* George Csahanin <george at dyb.com>
> *To:* tom <k5tra at austin.rr.com>; app_rpt-users at ohnosec.org
> *Sent:* Wednesday, August 28, 2013 9:22 PM
> *Subject:* Re: [App_rpt-users] RXONDELAY not working?
>
>   I'll chime in, I have it on a simplex node with simpleusb and it
> doesn't work. Made it 10,000 ms and no effect
>
>  GeorgeC
>  W2DB 2360
>
>  ----- Original Message -----
>  *From:* tom <k5tra at austin.rr.com>
>  *To:* app_rpt-users at ohnosec.org
>  *Sent:* Wednesday, August 28, 2013 1:11 PM
>  *Subject:* Re: [App_rpt-users] RXONDELAY not working?
>
>  The chan_simpleusb.c code clearly *has* the rxondelay parameter.
> However, I tested it on a couple of half-duplex nodes and didn’t see any
> effect. A bug?
>  Tom / K5TRA
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>


-- 
IMPORTANT: This email is intended for the use of the individual
addressee(s) named above and may contain information that is confidential
privileged or unsuitable for overly sensitive persons with low self-esteem,
no sense of humor or irrational religious beliefs. If you are not the
intended recipient, any dissemination, distribution or copying of this
email is not authorized (either explicitly or implicitly) and constitutes
an irritating social fauxpas. No animals were harmed in the transmission of
this email, although the mutt next door is living on borrowed time, let me
tell you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130902/898c0528/attachment.html>


More information about the App_rpt-users mailing list