[App_rpt-users] Lots of questions

Tim Sawyer tim.sawyer at me.com
Thu Sep 12 00:37:29 EDT 2013


app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56
--
Tim
:wq

On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM at amsat.org> wrote:

> I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP
> 
> My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service.
> 
> Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution.
> 
> I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good.
> 
> Apparare Scientior 
> Paratus Communicare
> -N1XBM
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20130911/e8092bb1/attachment.html>


More information about the App_rpt-users mailing list