[App_rpt-users] URI PTT issue
tim.sawyer at me.com
Wed Sep 18 20:28:26 EDT 2013
Also be sure the PTT-2-COR line is pulled up.
On Sep 18, 2013, at 1:05 PM, Keith Goobie <keith at goobie.org> wrote:
> Why not program the SCOM to use an inverted PTT signal and program the
> usbradio.conf to use an inverted signal for PTT. That should deal with the
> re-boot issue.
> On 9/18/13 4:00 PM, "Corey Badgley" <kc7mrq at bresnan.net> wrote:
>> I have an URI on port three of an SCOM 7330 controller. Everything works
>> perfectly unless power goes out and the node server reboots. The URI
>> keys the controller while the computer boots and stays keyed until one
>> of the following occurs:
>> 1. Audio from another node is received.
>> 2. Telemetry is broadcasted. ( I usually have telemetry turned off)
>> 3. Send a command to un-key the PTT.
>> 4. Enter echo mode within radio-tune-menu and my audio is rebroadcasted.
>> Is there a way to toggle the URI PTT upon a reboot or start-up to ensure
>> its logic is in the correct state?
>> Have a good day,
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
> keith at goobie.org
> Keith Goobie
> Richmond Hill, ON, CANADA
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
More information about the App_rpt-users