[App_rpt-users] RTCM mix clients

Tom Caspar tom.caspar at cpcomms.com
Wed Oct 1 16:58:02 EDT 2014


Finally had a chance to look at this again.  I tried resetting both sides after making the changes.  No help.

Set voter debug level 3 in asterisk and I'm seeing the following message repeatedly scrolling by in a blur when the mix client detects cor. Sequence numbers are continually incrementing by 1. I'm running software version 1.47 on all my clients.

mix client (Mulaw) my_client index:0 their seq:629 our seq:629
mix client my_client outa bounds, resetting!!

Can you offer any insight on what this debug message means?

Thanks,
Tom

----- Reply message -----
From: "Tim Sawyer" <tim.sawyer at mac.com>
To: "Tom Caspar" <tom.caspar at cpcomms.com>
Subject: [App_rpt-users] (no subject)
Date: Mon, Sep 29, 2014 11:22 PM

Sometimes you have to restart the RTCM and maybe Asterisk after changing the GPS mode.
--
Tim
:wq

On Sep 29, 2014, at 8:06 PM, Tom Caspar <tom.caspar at cpcomms.com<mailto:tom.caspar at cpcomms.com>> wrote:

I have a private node with 6 voted receivers usng RTCMs.  I'd like to add a 7th RTCM to this node that is always mixed in rather than voted.  I'm able to make this rtcm work as a 7th voted rceive with no problem.  Everything Ive read seems to indicate that if I change Gps pps polarity to "none" this will achieve my desired results, however I am unable to get audio out of my transmit rtcm from thiis 7th site.  It does change color to cyan in Allmon indicating it is non voted input but I do not get any indication or audio when that units COR goes active.  Is there something I'm missing?

Thanks,
Tom
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.




More information about the App_rpt-users mailing list