[App_rpt-users] Node 40660 is no longer in the database ...

Doug Crompton doug at crompton.com
Sat Oct 4 15:25:15 EDT 2014


Alberto,

   I don't see you listed here either. You are registered however -

40660=radio at 190.166.134.128:4569/40660,190.166.134.128

Look at /etc/asterisk/rpt.conf  with your editor and make sure the statpost lines for your node are not commented - semicolon before them. If so remove the semicolons and reboot.

; *** Status Reporting ***
;
; Uncomment the following two statpost lines to report the status of your node to stats.allstarlink.org
;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates

Remove semicolons on these two above statpost lines

Also note that this is a per node setting so if you have other nodes configured in rpt.conf you would need to uncomment them also if you wanted them listed.

This is what sends your status information to the server. It is not necessary for the system to operate but without it you will not appear on the list and other Allstar users will not know you are there. Sometimes this may be what you want!
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: alberto_e_puig at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Sat, 4 Oct 2014 06:43:20 -0400
Subject: [App_rpt-users] Node 40660 is no longer in the database ...




Hi everyone,

New to Allstar Link System. Everything is working just fine. I can still be able to use my node but in the last 2 days I cannot find my node info; on the Active Node List (Node 40660 is no longer in the database). The info. is being listed on the Allstar Link -- Node List as registered.

KP4AP

        
		         40660
     
      446.450 mHz
      100.0
      Sto Domingo,DN Dom.Rep.
      
      Dominican Republic
      QTH
      www.kp4ip.com

Any help or suggestions will be appreciated.

Regards and 73s,

KP4AP

Alberto


 		 	   		  

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141004/109b0eba/attachment.html>


More information about the App_rpt-users mailing list