[App_rpt-users] Two nodes, One URI

kk6ecm kk6ecm at gmail.com
Mon Oct 6 10:59:20 EDT 2014

Bob her with my 2 cents,

It's not clear to me what you want to accomplish. If the second node is a transmit only of the first nodes activity, then why not link the two nodes so the second merely repeats the activity on the first. I may be missing something, but using the gpio seems overly complicated. The second node could even be a private node, or do you require linking from outside your server?


Sent from iPad

> On Oct 5, 2014, at 11:03 PM, Sam Skolfield <kj6qfs at gmail.com> wrote:
> Hello all,
> I want to set up an app_rpt server with two independently functioning simpleusb nodes: 
> Node 1. Full duplex repeater 
> Node 2. Aux transmitter
> The second node is nothing more than a transmitter (TX audio, PTT) so couldn't I simply configure the second node's simpleusb.conf file with "gpio4 = ptt" ,  "txmixa=no", and "txmixb=voice" ? 
> Thanks and 73
> -- 
> Sam Skolfield
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141006/16f3401a/attachment.html>

More information about the App_rpt-users mailing list