[App_rpt-users] Disable announcements for node connects and disconnects

Doug Crompton doug at crompton.com
Sat Oct 11 19:23:38 EDT 2014


Bob,

 Putting these two statements in the node stanza(s) you want to control in rpt.conf is usually a good compromise. It allows the connect/disconnect messages when they are done locally at your repeater but not other messages from nodes connected to the site. The way this works is that there is a delay after doing the local connect/disconnect and then the messages are muted. The delay is about 30 seconds or so. So you could hear another message right after you do a connect if someone else gets in that window but after that it will be muted.

holdofftelem=1
telemdefault=2
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: kk6ecm at gmail.com
To: app_rpt-users at ohnosec.org
Date: Sat, 11 Oct 2014 14:46:43 -0700
Subject: [App_rpt-users] Disable announcements for node connects and	disconnects














When nodes connect, our repeater outputs long announcements
(e.g. node xxxxx is connected to node xxx...). How is this eliminated? Simple
tones are fine. I’m missing something here..

 

Thanks,

Bob

kk6ecm







_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141011/3d76f146/attachment.html>


More information about the App_rpt-users mailing list