[App_rpt-users] Ezstream errors

Loren Tedford lorentedford at gmail.com
Sun Oct 26 12:31:49 EDT 2014


copy to /etc/asterisk/rpt.conf (below node#) aka first section.
outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
--bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml
cp: cannot stat `ezstream.xml': No such file or directory
cp: `bin/awk' and `/usr/bin/awk' are the same file
cp: `bin/cut' and `/usr/bin/cut' are the same file
cp: `bin/env' and `/usr/bin/env' are the same file
cp: `bin/gawk' and `/usr/bin/gawk' are the same file
cp: `bin/gettext' and `/usr/bin/gettext' are the same file
cp: `bin/gunzip' and `/usr/bin/gunzip' are the same file
cp: `bin/gzip' and `/usr/bin/gzip' are the same file
cp: `bin/kill' and `/usr/bin/kill' are the same file
cp: `bin/ksh' and `/usr/bin/ksh' are the same file
cp: `bin/logger' and `/usr/bin/logger' are the same file
cp: cannot stat `share/man/man1/*': No such file or directory
cp: cannot stat `/share/doc/ez*': No such file or directory

Followed these directions below..

1.) Extract the attached file EZS.tgz

2.) Run 'sh EZS'

3.) Agree to everything - yes

4.) Modify the /etc/ezstream.xml file - replacing the ######'s with the
correct
mount point/password/name of your stream. (These details are provided by
radioreference.com when you sign up to do a stream FREE (under the
"Technicals" tab in the stream management section.)

5.) add the following to your /etc/asterisk/rpt.conf in the first section
ex: above the status reporting section.
"outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
--bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream.xml"

*This should be all on one line ^^^*
You may change the ezstream.xml name if you wish but also do so in the /etc
dir, ex: if you had multiple streams/nodes to stream from.
This setup is per node.

btw sometimes I have had to set a cron to kill the ezstream each week or so
- has not been an issue lately if you do notice it failing, the command is
'kill -9 $(pgrep ezstream)&' This will not break/stop ezstream but should
restart it...

Here is example of what it looks like in rpt.conf

[29925]                                 ; Change this to your assigned node
num$
rxchannel=Radio/usb29925
outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
--bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml
duplex=2

Example of node number two same config
[27103]                                 ; Change this to your assigned node
num$
rxchannel=Radio/usb27103
outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
--bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream2.xml
duplex=2

Ez stream still not working even with the correct information in the
ezstream.xml files located in /etc/

Kinda lost now what steps i have missed..


Loren Tedford (KC9ZHV)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141026/8f5f75c4/attachment.html>


More information about the App_rpt-users mailing list