[App_rpt-users] Ezstream errors

Bob Prybyzerski w2ymm1 at gmail.com
Mon Oct 27 01:24:16 EDT 2014


I tried the install today, but I cant seem to find the ezstream. xml file so I can edit it. 
Do you need to create that file manually ? Or should there be a template file somewhere to start with ?  
Bob W2YMM


Sent from my iPhone
Bob Prybyzerski
631-960-1051

> On Oct 27, 2014, at 12:59 AM, Alain Mugnier <astroportable at gmail.com> wrote:
> 
> cp: cannot stat `ezstream.xml': No such file or directory
> 
> And from there it starts it seems.
> 
> Ok for some reason it's not in the right spot or can't read the file.
> 
> Checklist says check ownership and permissions and if file is where it's supposed to be or is a setting there out of wack?
> 
> With any luck after sorting that the rest might come good ;-) touch wood.
> 
> 
> Just a guess on my wild behalf that or the file could be corrupt (unlikely) Or file locking has occurred due to some stupid non apparent reason.
> 
> Well usually there is a good reason eg a session crashed and text editor or even program in question didn't get time to shut the file proper.
> 
> That one probably being the biggest aherm.
> 
> 
> I have put the call out to those who use Broadcastify that I know of to see if they could spot the problem straight of
> and if so to contact you.
> 
> Hope that helps.
> 
>> On 27 October 2014 03:01, Loren Tedford <lorentedford at gmail.com> wrote:
>> copy to /etc/asterisk/rpt.conf (below node#) aka first section.
>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml
>> cp: cannot stat `ezstream.xml': No such file or directory
>> cp: `bin/awk' and `/usr/bin/awk' are the same file
>> cp: `bin/cut' and `/usr/bin/cut' are the same file
>> cp: `bin/env' and `/usr/bin/env' are the same file
>> cp: `bin/gawk' and `/usr/bin/gawk' are the same file
>> cp: `bin/gettext' and `/usr/bin/gettext' are the same file
>> cp: `bin/gunzip' and `/usr/bin/gunzip' are the same file
>> cp: `bin/gzip' and `/usr/bin/gzip' are the same file
>> cp: `bin/kill' and `/usr/bin/kill' are the same file
>> cp: `bin/ksh' and `/usr/bin/ksh' are the same file
>> cp: `bin/logger' and `/usr/bin/logger' are the same file
>> cp: cannot stat `share/man/man1/*': No such file or directory
>> cp: cannot stat `/share/doc/ez*': No such file or directory
>> 
>> Followed these directions below..
>> 
>> 1.) Extract the attached file EZS.tgz
>> 
>> 2.) Run 'sh EZS'
>> 
>> 3.) Agree to everything - yes
>> 
>> 4.) Modify the /etc/ezstream.xml file - replacing the ######'s with the
>> correct
>> mount point/password/name of your stream. (These details are provided by
>> radioreference.com when you sign up to do a stream FREE (under the
>> "Technicals" tab in the stream management section.)
>> 
>> 5.) add the following to your /etc/asterisk/rpt.conf in the first section
>> ex: above the status reporting section.
>> "outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream.xml"
>> 
>> *This should be all on one line ^^^*
>> You may change the ezstream.xml name if you wish but also do so in the /etc
>> dir, ex: if you had multiple streams/nodes to stream from.
>> This setup is per node.
>> 
>> btw sometimes I have had to set a cron to kill the ezstream each week or so
>> - has not been an issue lately if you do notice it failing, the command is
>> 'kill -9 $(pgrep ezstream)&' This will not break/stop ezstream but should
>> restart it...
>> 
>> Here is example of what it looks like in rpt.conf
>> 
>> [29925]                                 ; Change this to your assigned node num$
>> rxchannel=Radio/usb29925
>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml
>> duplex=2
>> 
>> Example of node number two same config
>> [27103]                                 ; Change this to your assigned node num$
>> rxchannel=Radio/usb27103
>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream2.xml
>> duplex=2
>> 
>> Ez stream still not working even with the correct information in the ezstream.xml files located in /etc/
>> 
>> Kinda lost now what steps i have missed..
>> 
>> 
>> Loren Tedford (KC9ZHV) 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141027/97b66634/attachment.html>


More information about the App_rpt-users mailing list