[App_rpt-users] Non Voting RTCM (just a basic node) On ExistingServer

Jim jimw7ry at gmail.com
Wed Oct 29 00:35:29 EDT 2014

Thanks but not voting. Only one RTCM will be used. So I can eliminate the site 2 and 3 I assume? Do I need a voter.conf file?
Jim W7RY

From: Tim Sawyer 
Sent: Tuesday, October 28, 2014 9:05 PM
To: Jim 
Cc: app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] Non Voting RTCM (just a basic node) On ExistingServer

Only one line changes in rpt.conf, the rxchannel= line. Like so: 


Then you need a voter.conf like so:

port = 667
password = BLAH
utos = y
buflen = 250

Site1 = passwd1,transmit
Site2 = passwd2,transmit
Site3 = passwd2,transmit

No, you don’t need a C-name for your server. Just a plain ‘ol dot notation IP works fine (i.e.

Easy, no?


  On Oct 28, 2014, at 3:32 PM, Jim <jimw7ry at gmail.com> wrote:

  I have an existing server and node running on a PC at my repeater site. The IP is static.

  I want to set up an RTCM at home that runs from the server described above. Could someone please send me a rpt.conf file that has such a setup please? Reading the
  RTCM manual, it’s looking for a DNS entry for the hosting server. I don’t really need to use DNS if my server runs static IP? So any tips on setting up the RTCM networking would be helpful too.

  I have moved the node from it’s own server to the server at the repeater site on allstarlink.org.

  Hooking and interfacing to the radio is the EASY part. The config not so much.

  Any help or tips would be appreciated!

  Jim W7RY

  App_rpt-users mailing list
  App_rpt-users at ohnosec.org

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20141028/50ef3199/attachment.html>

More information about the App_rpt-users mailing list