[App_rpt-users] I/O using parallel port

Jamey Wright jamey.wright at charter.net
Fri Aug 7 19:29:22 EDT 2015


Since I have the node computer here at house for a day or 2 instead of at
the tower site I decided I would go ahead and configure the I/O for
something I have in mind in the future.  I seem to be having some issues
though.  When I enter *8401 from IAXRPT, I get back "beep beep"  but I don't
see a state change with my DMM across pin 2 and ground

 

 

In BIOS, the parallel port is configured at address 378 and IRQ7 and in EPP
mode.

 

I have this in the RPT.CONF:

 

[functions27981]

 

<clipped for brevity>

 

80=status,1

81=status,2

 

8401 = cop,61,pp2=0

8402 = cop,61,pp3=0

 

8411 = cop,61,pp2=1

8412 = cop,61,pp3=1

 

901=cop,33                         ; Local telemetry output enabled

902=cop,34                         ; Local telemetry output disabled

903=cop,35

 

And I have this in SIMPLEUSB.CONF:

 

; SimpleUSB configuration

;

[general]

 

pp2=out1

pp3=out0

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150807/2897d53e/attachment.html>


More information about the App_rpt-users mailing list