[App_rpt-users] Beagle Board-xM Pickle Build w/URI

John C. Westmoreland, P.E. john at westmorelandengineering.com
Mon Aug 10 15:48:35 EDT 2015


Hello Jeff,

Yes, that appears to work just fine

73's,
John
AJ6BC
On Aug 10, 2015 8:34 AM, "Jeff Carrier" <k0jsc.jeff at gmail.com> wrote:

> Set "telemetry" in the node stanza to "telemetry=0" or "telemetry=2" as
> documented here  http://ohnosec.org/drupal/node/103 unless that
> functionality doesn't exist on pickle.  I'm not familiar with pickle.
>
>
> de K0JSC
>
> On Mon, Aug 10, 2015 at 12:15 AM, John C. Westmoreland, P.E. <
> john at westmorelandengineering.com> wrote:
>
>> Hello All,
>>
>> I have an xM up and running with the latest build from allstarlink.org -
>> is there one site that has
>> example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM
>> using the URI?  I currently
>> have some radios from Yaesu - the VX-7R has been interfaced and seems to
>> work; but my current configs are relatively simple.  I also want to put a
>> FT-7900R on line.
>>
>> How do you eliminate the telemetry 'node xx connected, node xx
>> disconnected' messages from being broadcast?
>>
>> 73's,
>> John
>> AJ6BC
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150810/4d70520f/attachment.html>


More information about the App_rpt-users mailing list