[App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

kk6ecm kk6ecm at gmail.com
Fri Aug 14 15:38:10 EDT 2015


Pin 23-24 is correct. This has been updated on the website, as you've
indicated, and told it is updated in newer uridiag.

 

Thanks,

Bob

kk6ecm

 

  _____  

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of John C.
Westmoreland, P.E.
Sent: Thursday, August 13, 2015 10:52 PM
To: app_rpt mailing list
Subject: Re: [App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

 

Hello Again,

 

To get correct results - doesn't it make more sense to wire up this:

http://www.dmkeng.com/images/URIx_TEST_FIXTURE.pdf

 

>From the above - how does AIN (pin 24) work?

 

73's,

John

AJ6BC

 

 

On Wed, Aug 12, 2015 at 10:39 PM, John C. Westmoreland, P.E.
<john at westmorelandengineering.com> wrote:

Hello All,

 

Here is the wiring instructions from the FAQ:

 

Pin 1 to Pin 7

Pin 2 to Pin 3

Pin 4 to Pin 8

Pin 23 to Pin 24

10K Resistor between Pins 21 and 22

10K Resistor between Pins 21 and 23

For URIx (CM119) only, also include the following connections:

Pin 5 to Pin 10

Pin 6 to Pin 11

 

>From uridiag:

 

Enter your selection:c

Special Test Cable Pinout:

 

25 pin D-shell connector

  Pin 1 to Pin 7

  Pin 2 to Pin 3

  Pin 4 to Pin 8

  Pin 11 to Pin 24

  10K Resistor between Pins 21 & 22

  10K Resistor between Pins 21 & 23

  For URIx (CM119), also include the following:

  Pin 5 to Pin 10

  Pin 6 to Pin 11

  Do *NOT* include these for the standard URI!!

 

So, which one of these do I use?

 

73's,

John

AJ6BC

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150814/9e11ddeb/attachment.html>


More information about the App_rpt-users mailing list