[App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

Doug Crompton doug at crompton.com
Fri Aug 14 16:17:55 EDT 2015


Also note you do not need external 12V for the additional op-amp. It will work on 5V from the URI as long as you do not exceed the P-P output for that voltage which would probably be somewhere around 2V P-P. You obviously could get more swing running it on 12V but if you don't need it, it works fine on 5V.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: kk6ecm at gmail.com
To: john at westmorelandengineering.com; app_rpt-users at ohnosec.org
Date: Fri, 14 Aug 2015 12:38:10 -0700
Subject: Re: [App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle















Pin 23-24 is correct. This has been
updated on the website, as you've indicated, and told it is updated in newer
uridiag.

 

Thanks,

Bob

kk6ecm

 









From:
app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of John C. Westmoreland, P.E.

Sent: Thursday, August 13, 2015
10:52 PM

To: app_rpt mailing list

Subject: Re: [App_rpt-users]
Correct Wiring For The URIx Diagnostic Dongle



 



Hello Again,



 





To get correct results - doesn't it make more sense to wire up this:





http://www.dmkeng.com/images/URIx_TEST_FIXTURE.pdf





 





>From the above - how does AIN (pin 24) work?





 





73's,





John





AJ6BC





 







 



On Wed, Aug 12, 2015 at 10:39 PM, John C. Westmoreland, P.E. <john at westmorelandengineering.com>
wrote:



Hello All,



 





Here is the wiring instructions from the FAQ:





 





Pin 1 to Pin 7





Pin 2 to Pin 3





Pin 4 to Pin 8





Pin 23 to Pin 24





10K Resistor between Pins 21 and 22





10K Resistor between Pins 21 and 23





For URIx (CM119) only, also include the following connections:





Pin 5 to Pin 10





Pin 6 to Pin 11





 





>From uridiag:





 







Enter your selection:c





Special Test Cable Pinout:





 





25 pin D-shell connector





  Pin 1 to Pin 7





  Pin 2 to Pin 3





  Pin 4 to Pin 8





  Pin 11 to Pin 24





  10K Resistor between Pins 21 & 22





  10K Resistor between Pins 21 & 23





  For URIx (CM119), also include the following:





  Pin 5 to Pin 10





  Pin 6 to Pin 11





  Do *NOT* include these for the standard URI!!







 





So, which one of these do I use?





 





73's,





John





AJ6BC







 









_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150814/1b6d9fc5/attachment.html>


More information about the App_rpt-users mailing list