[App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

John C. Westmoreland, P.E. john at westmorelandengineering.com
Sat Aug 15 20:36:50 EDT 2015


A nicer web-look is from this URL:



On Sat, Aug 15, 2015 at 2:14 PM, John C. Westmoreland, P.E. <
john at westmorelandengineering.com> wrote:

> Barry,
> Look here: http://svn.ohnosec.org/svn/projects/allstar/ .
> Latest uridiag is there.
> 73's,
> John
> On Aug 15, 2015 13:30, "Barry" <g8sau at sidx.org.uk> wrote:
>> At 21:17 14/08/2015, Doug Crompton wrote:
>>> Also note you do not need external 12V for the additional op-amp. It
>>> will work on 5V from the URI as long as you do not exceed the P-P output
>>> for that voltage which would probably be somewhere around 2V P-P. You
>>> obviously could get more swing running it on 12V but if you don't need it,
>>> it works fine on 5V.
>> All Interesting stuff but where to find uridiag ? program its not on ACID
>> dist?
>> and not on my RasPI-2 dist?
>> is this something that on the dmk site ? I have 6 URI's but never seen
>> this tool?
>> Barry
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150815/161775f7/attachment.html>

More information about the App_rpt-users mailing list