[App_rpt-users] modified custom nodenames

Buddy Brannan buddy at brannan.name
Tue Aug 18 18:50:05 EDT 2015


Thanks Doug,

Once I get my system back up and going, I'm definitely giving this a go. 

Vy 73,

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194 
Mobile: 814-431-0962
Email: buddy at brannan.name




> On Aug 18, 2015, at 6:42 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> Here is a modified script that I think answers the need for not overwriting existing files in /var/lib/asterisk/sounds/rpt/nodenames
> 
> Read the comments! Directories need to be defined! Also I am open to any and all suggestions on improving this. I think it might be a useful script to include in the arm-allstar distributions.
> 
> You can call this anything you want to test.. Be sure to make it executable.
> 
> # !/bin/bash
> #
> #  Originally Created by Marshall Dias
> #  Modified by Doug, WA3DSP 8/18/2015
> 
> # Script to write Calls to /var/lib/asterisk/sounds/rpt/nodenames
> # which will then be used in place of node numbers. This script
> # will NOT overwrite exisitng files.
> #
> # If you want to start clean and delete all nodename files do
> #    rm -rf /var/lib/asterisk/sounds/rpt/nodenames/*
> # or delete just the files you want to replace.
> # See all comments below
> 
> # Set the source directory to the Allstar database on your system.
> # 'locate astdb.txt'  This file will exist if you are running any of the
> # images from hamvoip.org or you have installed allmon or lsnodes on
> # your system. For the BBB and RPi2 it will generally be /var/log/asterisk
> 
> SRCDIR=/var/log/asterisk
> 
> # Set the destination directory. I recommend a test directory as shown at first.
> # The final destination would be /var/lib/asterisk/sounds/rpt/nodenames
> 
> #DESTDIR=/var/lib/asterisk/sounds/rpt/nodenames
> DESTDIR=/tmp/nodes
> 
> # Definitions of sound file directories
> 
> NODENAMES=/var/lib/asterisk/sounds/rpt/nodenames
> LETTERS=/var/lib/asterisk/sounds/letters
> NUMBERS=/var/lib/asterisk/sounds/digits
> STRING=""
> 
> while IFS='|' read f1 f2 f3 f4
> do
> 
> echo "Processing Node Number: $f1 - Callsign: $f2"
> 
> STRING=""
> 
> foo=${f2,,}
> for (( i=0; i<${#foo}; i++ )); do
>   char=${foo:$i:1}
> 
>                 case ${foo:$i:1} in
>                 [0-9]*) FILENAME=$NUMBERS/$char.gsm ;;
>                 "/") FILENAME=$LETTERS/slash.gsm ;;
>                 "-") FILENAME=$LETTERS/dash.gsm ;;
>                 [a-z]*|[A-Z]*) FILENAME=$LETTERS/$char.gsm ;;
>                 esac
> 
> STRING="$STRING $FILENAME"
> done
> if [ -f "$DESTDIR/$f1.gsm" ]
>   then
>     echo "$DESTDIR/$f1.gsm exists - not overwriting"
>   else
>     cat $STRING > "$DESTDIR/$f1.gsm"
> fi
> done < $SRCDIR/astdb.txt
> 
> # End of script
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.




More information about the App_rpt-users mailing list