[App_rpt-users] Dial vs ACID

Angelo n5uxt at hotmail.com
Sat Dec 5 18:12:50 EST 2015


Hi All,

  I just switched over to DIAL here at home and was going over all the 
changes in the RPT,  and several other
config files. I also did a search in the archives and found this email.

  Where are the helper scripts for convert the files from ACID to 
DIAL??? I woud love to get my Dial node running.


Angelo


On 10/23/2015 9:37 AM, Steve N4IRS wrote:
> One thing that I was reminded of is that a conversion from ACID to 
> DIAL will require changing rpt.conf. change all occurrences of zaptel 
> with dahdi.
> The "helper" scripts do that to downloaded configs from the portal.
>
> Steve
>
> On 10/23/2015 10:32 AM, Tim Sawyer wrote:
>> Steve,
>>
>> You did a beautiful job with the config files comments...  and the 
>> whole Distro... well done!!!
>>
>> On Fri, Oct 23, 2015 at 6:55 AM, Steve Zingman <szingman at msgstor.com 
>> <mailto:szingman at msgstor.com>> wrote:
>>
>>     Pete,
>>     Not sure if that is a question. Yes having a backup of
>>     /etc/asterisk will get you up right away. Yes, any custom audio
>>     files and scripts are a good thing to backup also.
>>     To get back online fast, just overwrite the sample files in
>>     /etc/asterisk. Longer term, if you look at /srv/config you will
>>     find the sample config files. I've tried to add a lot of comments
>>     and made them easier to read.
>>     It's really not hard to edit iax.conf, extensions.conf and
>>     rpt.conf with your data. modules.conf is different in DIAL. I
>>     made the decision that if you are not using a channel driver,
>>     app, feature or function, why load them.
>>     Take a look, it's pretty well commented.
>>
>>     As always, copy the files before editing. All the above applies
>>     to x86 DIAL as well as Raspberry Pi2 DIAL.
>>
>>     73, Steve N4IRS
>>
>>     On 10/23/2015 7:17 AM, pete M wrote:
>>>     If the upgrade is needed, would a copy of all the files in
>>>     ect/asterisk/ directory would be enough to start back the system
>>>     at the minimum. of course any script or audio files would still
>>>     need to be ported to the new system.
>>>
>>>     Sent from my iPad
>>>
>>>     On Oct 21, 2015, at 9:35 PM, Steve Zingman
>>>     <szingman at msgstor.com> wrote:
>>>
>>>>     Nope,
>>>>     If it works, don't fix it. If you run into something the
>>>>     underlying OS can't do, upgrade.
>>>>
>>>>     73, Steve N4IRS
>>>>
>>>>     On 10/21/2015 09:22 PM, Jamey Wright wrote:
>>>>>
>>>>>     I have a couple of systems running ACID.  Is there any
>>>>>     compelling reason to upgrade them to DIAL?  I don’t have any
>>>>>     issues with them at the moment and I have some other things
>>>>>     I’d rather be doing.
>>>>>
>>>>>     Thanks
>>>>>
>>>>>     Jamey
>>>>>
>>>>>     WR4JW
>>>>>
>>>>>
>>>>>
>>>>>     _______________________________________________
>>>>>     App_rpt-users mailing list
>>>>>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>>     To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>
>>>>     -- 
>>>>     "Anything is possible if you don't know what you are talking about."
>>>>     1st Law of Logic
>>>>     _______________________________________________
>>>>     App_rpt-users mailing list
>>>>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>     To unsubscribe from this list please visit
>>>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>>     scroll down to the bottom of the page. Enter your email address
>>>>     and press the "Unsubscribe or edit options button"
>>>>     You do not need a password to unsubscribe, you can do it via
>>>>     email confirmation. If you have trouble unsubscribing, please
>>>>     send a message to the list detailing the problem.
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visit
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>     scroll down to the bottom of the page. Enter your email address
>>     and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via
>>     email confirmation. If you have trouble unsubscribing, please
>>     send a message to the list detailing the problem.
>>
>>
>>
>>
>> -- 
>> --
>> Tim
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151205/446dd8e7/attachment.html>


More information about the App_rpt-users mailing list