[App_rpt-users] RPI2 DIAL

David KE6UPI dshaw at ke6upi.com
Tue Dec 8 11:34:46 EST 2015

OK I just had this problem.. One of my antennas was 12" a way from the RPi
and when the radio (5 watts) keyed up the RPi rebooted. I couldn't figure
why it was rebooting.  I moved the antenna and all is well.


On Tue, Dec 8, 2015 at 7:39 AM, Robert Newberry <N1XBM at amsat.org> wrote:

> I replied directly to Corey and not to the list. So I'll check top for
> uptime and I'll monitor that. I'll also monitor the logs. Everything looks
> ok. The only thing I see that may be suspicious is.
> Transfer to device 4 endpoint 0x2 frame 1141 failed - FIQ reported NYET.
> Data may have been lost.
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151208/ff449fdd/attachment.html>

More information about the App_rpt-users mailing list