[App_rpt-users] Courtesy Tone when SIP connection unkeys
kf7mbk at w7ara.net
Thu Dec 17 10:40:27 EST 2015
I set ALL the CTs to the same known good CT, and after the change there was
a change on the radio side, but not the SIP side.
Set duplex to 1
holdofftelem=1, also tried 0
nolocallinkct=0 also tried 1
I'll try again, but I may just dump this V1 BBB install and go to a RP2
Mike Montalvo, KF7MBK
ARA Membership Chair
On Tue, Dec 15, 2015 at 7:58 PM, <mike at midnighteng.com> wrote:
> You probably need to look at other setting to be sure...
> But first, be sure your current settings are not "out-of-range" and
> & Type errors etc.
> Some places to look...
> nolocallinkct=1 ; Use unlinkedct if only connected to a local node
> Just a thought...
> Be sure to fill us in if you find it.
> > I have a private allstar node set up that allows a SIP connection.
> > No matter what I do I can't seem to get allstar to TX a courtesy tone on
> > the radio when the SIP connection unkeys. I feel like I've done this
> > before but I've set every courtesy tone to a valid tone in rpt.conf and I
> > get CT if the radio unkeys, but not if the SIP connection unkeys. Is
> > just not possible or am I being dumb?
> > Regards,
> > Mike Montalvo, KF7MBK
> > ARA Membership Chair
> > www.w7ara.org
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> down to the
> > bottom of the page. Enter your email address and press the "Unsubscribe
> or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If
> > you have trouble unsubscribing, please send a message to the list
> detailing the
> > problem.
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users