[App_rpt-users] SIP CT

Mike M kf7mbk at w7ara.net
Fri Dec 18 09:35:31 EST 2015


I was looking at the code last night for exactly that.. I found where the
COP 6 command is processed.  But as you said, unkey is # and I couldn't
even find where that is processed.  I didn't look super hard as
recompinling on the BBB is stupid slow and I just didn't want to spend the
time.

I did have the idea of creating a pseudo node to come in with the sip
connection that then connects to the radio node as Mike mentioned.  I think
then I could have a CT out the radio.

Thanks for the help everyone.  For now I'll deal..


Regards,
Mike Montalvo, KF7MBK
ARA Membership Chair
www.w7ara.org






On Fri, Dec 18, 2015 at 7:18 AM, Ken <ke2n at cs.com> wrote:

> The CT is when the receiver squelch closes and the time-out timer resets.
> It is not specifically to do with unkeying the transmitter. You can have a
> really long hang time and the transmitter will practically never unkey, but
> you still get CT’s.  I don’t think there is a time-out timer for a SIP
> connection. So the timer that triggers the CT is not there.   If, however,
> you have your SIP users entering a DTMF function to “transmit” maybe you
> can modify that function so it plays a tone on unkey.  Of course, unkey is
> usually the pound symbol so that might be tricky…
>
>
>
> Ken
>
>
>
> *From:* Mike - W5JR [mailto:w5jr.lists at gmail.com]
> *Sent:* Thursday, December 17, 2015 11:53 PM
> *To:* Mike M <kf7mbk at w7ara.net>
> *Cc:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] SIP CT
>
>
>
> The stations down link have the usual CTs, but the node the SIP is
> connected to doesn't. I'm intuiting the workaround is to have an
> intervening node. I've not implemented this for my connection but sounds
> like a good test.
>
> tnx
>
> Mike / W5JR
>
> Alpharetta GA
>
>
> On Dec 17, 2015, at 5:02 PM, Mike M <kf7mbk at w7ara.net> wrote:
>
> When you "unkey" from the SIP side, I want a CT to come out on the radio.
> I can see what you mean about not needing a CT out of the SIP side.  But
> when apt_rpt unkeys the radio, whether from a link or SIP, I would think it
> should generate a CT on the radio. Whether that's the logic in the code, I
> don't know.
>
>
>
> I'll play around with it tonight, maybe take a look through the code.
>
>
>
>
>
>
>
>
>
>
>
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Thu, Dec 17, 2015 at 11:22 AM, <mike at midnighteng.com> wrote:
>
> Ken your right, no sip ct.
> Feeling a bit stupid after testing mine that I have not used in years, it
> does not
> trip CT either.
> I 'think' because it does not trip the COR code. It bypasses it. Could be
> for good
> reason?
>
> Echolink connections are full duplex. A requirement of the host.
> ELink user can key-up and rptr users can converse with him without him ever
> unkeying until rptr time-out. Same with SIP.
> I don't feel it's pointless to have a CT at the end of any tx on a
> repeater.
>
> But since most just use it for sysop testing and monitoring, no big deal.
>
> ...mike/kb8jnm
>
> > I don't think SIP has a CT.
> > SIP connections are full duplex; it's pointless to have an "over" beep.
> >
> > 73
> > Ken
> >
> >
> > -----Original Message-----
> > From: app_rpt-users-bounces at ohnosec.org
> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
> > app_rpt-users-request at ohnosec.org
> > Sent: Thursday, December 17, 2015 12:00 PM
> > To: app_rpt-users at ohnosec.org
> > Subject: App_rpt-users Digest, Vol 82, Issue 39
> >
> > Send App_rpt-users mailing list submissions to
> >       app_rpt-users at ohnosec.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >       http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > or, via email, send a message with subject or body 'help' to
> >       app_rpt-users-request at ohnosec.org
> >
> > You can reach the person managing the list at
> >       app_rpt-users-owner at ohnosec.org
> >
> > When replying, please edit your Subject line so it is more specific than
> > "Re: Contents of App_rpt-users digest..."
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> down to the
> > bottom of the page. Enter your email address and press the "Unsubscribe
> or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If
> > you have trouble unsubscribing, please send a message to the list
> detailing the
> > problem.
> >
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151218/2a9ad7ae/attachment.html>


More information about the App_rpt-users mailing list