[App_rpt-users] DIAL usbradio conversion to simpleusb

kk6ecm kk6ecm at gmail.com
Thu Dec 31 19:30:26 EST 2015

What I believe I've learned...

I've not checked this on ACID, but I just completed converting from usbradio
to simpleusb using DIAL on an RPi, and found I had to increase the levels by
about 2 dB (60% increase) to get the same response from the radio. This was
for both the rx and tx values. usbradio worked as before on the replaced
ACID box. I found the RPi handled the usbradio processing load quite well,
and received compliments on the audio quality.


More information about the App_rpt-users mailing list